Insignia NS-15cltv Setting audio options, Setting up speaker output, Setting up Dolby Digital

NS-15CLTV - combined.fm Page 18 Wednesday, July 26, 2006 1:01 PM

Insignia NS-15CLTV 15" Combo DVD/LCD TV

Setting audio options

To set up general audio options:

1While the TV is in DVD mode, press SETUP.

2Press to select the Audio menu icon,

then press PLAY. The Audio Setup Page opens.

3Press repeatedly to go back to the previous menu.

Setting up speaker output

To set up speaker output:

1In the Audio Setup Page, highlight Speaker

Setup, then press PLAY. The Speaker Setup Page opens.

2Press to highlight Downmix, then

press PLAY.

3Press to highlight Lt/Rt or Stereo, then

press PLAY.

•Lt/Rt—On a disc recorded with a multi-channel soundtrack, the output signal will be incorporated into a left and right channel.

•STEREO—On a disc recorded with a multi-channel soundtrack, the output signal will be incorporated into stereo.

4Press repeatedly to go back to the previous menu.

Setting up Dolby Digital

To set up Dolby Digital:

1In the Audio Setup Page, highlight Dolby

Digital Setup, then press PLAY. The Dolby Digital Setup page opens.

•DUAL MONO—This is the output mode of the L and R signals of the set audio output. If it is set to “MIXED MONO,” the function only works when the DVD uses 5.1-channel sound.

•D.R.C—This is selected to adjust the linear compression rate to obtain different compression results of the signals.

3Press to change the setting, then press

PLAY.

4Press repeatedly to go back to the previous menu.

Using the equalizer

You can select preset graphic equalizer patterns according to the genre of the music being played. You can also adjust the equalizer settings.

To use the equalizer:

1In the Audio Setup Page, highlight Channel

Equalizer, then press PLAY. The Channel Equalizer page opens.

2Press to highlight EQ TYPE, then

press PLAY.

3Press to select one of the following preset equalizer patterns:

•None

•Rock

•Pop

•Live

•Dance

•Techno

•Classic

•Soft

4Select the setting you want, then press

PLAY.

5Press repeatedly to go back to the previous menu.

Setting up 3D sound

To set up 3D sound:

1In the Audio Setup Page, highlight 3D

Processing, then press PLAY. The 3D Processing Page opens.

2Press to highlight DUAL MONO or

D.R.C, then press PLAY.

•V SURR—Turns virtual surround sound on and off.

•Reverb Mode—Select a reverb mode.

2Press repeatedly to go back to the previous menu.

18 www.insignia-products.com