Insignia NS-15CLTV 15" Combo DVD/LCD TV
Connecting to a computer
To connect a computer video source to the VGA jacks:
1Remove the port cover on the back of the TV (4).
2Connect a VGA cable (2) from the computer (1) to the VGA INPUT port on the TV.
3Connect a
4Press the INPUT button and the 
buttons to set the TV’s signal input to PC.
Note
The best resolution for displaying computer video on this TV is 1024 × 768.
Using your TV
Turning the power on and off
To turn the power on and off:
1Press the POWER button on the top of the TV or on the remote control. The POWER indicator turns green.
2To turn off the TV, press the POWER button again. The screen image disappears and the STANDBY indicator turns red.
Note
A small amount of electric power is consumed even when the power is turned off.
Changing the volume
You can change the volume using the TV’s top panel or the remote control.
To change the volume:
1Press VOL+ or
2Press MUTE to mute the sound, and press it again to restore sound.
Changing the video source
Your TV supports multiple video sources.
To select the video source:
•Press the INPUT button to select from the following signal modes, then press ENTER to confirm the selection:
•TV
•AV
•
•DVD
•PC
Changing channels
To change channels:
•Press CH+/- or CH 
/ 
.
To enter a channel number directly:
•Press the number buttons on the remote control.
To switch between two channels:
1Press RECALL to change from the currently tuned channel to the previous channel.
2Press RECALL again to change back to the originally tuned channel.
Programming channels into memory
To automatically program channels into memory:
1Press TV MENU on the remote control, then
press 
to highlight the INSTALL icon. The INSTALL menu opens.
9 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|