Kathrein UFD 505 manual Programme selection, Important on-screen displays

Page 17

Programme selection

Important on-screen displays

The receiver functions are controlled by a microprocessor and extensive software. The following explanations are intended to improve understanding of all proce- dures and to minimise the risk of mistakes.

TV channel identifier

The channel identifier is displayed for several seconds every time the channel is

changed or by pressing the ￿button.

The I indicates that a channel is received

even if no picture can be seen (e.g. radio).

The film symbol indicates a TV channel with the selected programme shown next to it and whether teletext is received. The current time, start time and end time of the current programme are shown on the next line provided these data are trans- mitted. The + in the third line stands for the programme selection from the main programme list. If the favourite list is selected, you will see the "apple" symbol at this point. This is followed by the set sound reproduction mode (depending on the direction of the symbolised sound waves, mono left, mono right or stereo can be set, the digit indicates the number of sound channels). The programme title is shown in the box on the right.

Radio channel indicator

The identifier for the set radio channel has the same configuration. A music note appears in the upper right-hand corner indicating a radio channel. Programme times and text are displayed only if the corresponding data are transmitted with

the signal.

Error message

"Bad or no signal" indicates that there is a fault in the reception system or in the re- ceiver settings or the transponder is not

transmitting. Instead of the I the channel

identifier shows a satellite antenna to- gether with the message "bad or no signal". Check the SAT-IF connection and the LNB configuration. As an aid, refer to

the list of service settings provided at the end of this User's Guide.

TV programme list

Press the ￿button to show the pro-

gramme list. A + for the main programme list or the "apple" symbol is indicated at the top left. The list can be changed by pressing the button again. Information relating to the received satellites, the polarisation, the symbol rate, scrambling, favourite or standard programme and the parental control is provided in the column below the symbol. The column on the left

contains information relating to the channel, the programme provider and whether

17

Image 17
Contents Order no Page Important Notes Safety InstructionsFirst time operation Oscillator frequency L.O Changing the oscillator frequency Remote frequency Important notes regarding operation Operating elements, displays and connections Flap folded down View of front panelView of rear panel Remote control handset keys Connection and putting into operation Second receiver on the command setAlphanumeric entries Menu conceptButton functions Language selection- OSD Operating instructionsPresetting of receiving system Preconditions for receiving digital signalsTo connect receiver Sat-IF connectionLNB-supply voltage Inserting batteries in the remote controlTV and video recorder connection Audio connectionFirst steps Factory setting of receiverImportant on-screen displays Programme selectionReception status Selecting a TV programmeRadio programme list On-screen displays On Screen Display Switching over to radio programmeSelecting a TV programme by number entry Reception status radioSelecting a radio programme by number entry VPS signal Timer-settingsFull EPG EPG timer programmingProgramme overview Setting the volume Sound settingsStereo and two-channel sound reproduction MuteFavourite programmes Programme listsSelecting programmes last received To delete a programme To sort the channelsTo add a programme manually Incorrect parameter Satellites add/remove Setting up a satelliteTo enter a name To remove satelliteFactory setting PasswordEntering a password Parental lockSame accounts for transponder exchange Operation from the front panel Backup operationSystem parameters Setting system parametersTV type Summer timePicture format ScreenOSD trans OSD colour10,7…11,7 GHz Low-band Low-band / analogue transmis Sion Installation menuLNB configuration Changing the oscillator frequency Satellite search Antenna settingsTransponder selection TP set-up/searchDiSEqC UFO Set-up ErrorKHz signal High/Low Pos. A/B Tone Burst Tone burst Opt. A/B Factory setting Playback Recording„Display info Transferring operating software PreparationTransferring programme lists Technical features Technical annex Technical dataScart socket assignments AccessoriesConnection arrangement Connection examplesVHF/UHF VCR LNB DiSEqC components Short technical lexiconEb/No ratio Programme packageTransponder Symbol rateVideo bit rate ViterbirateDiSEqC menu ServiceSatellite 998.6246/1001/ZWT/ Subject to technical changes