Kathrein UFD 505 manual Summer time, TV type, Picture format, Screen, Mode

Page 33

Setting system parameters

Summer time

See above. Changeover in spring or fall.

Confirm by pressing two times.

TV type

Use the buttons to specify whether your TV set is a

PAL,

Multi-standard

NTSC unit

Confirm by pressing two times.

Picture format

Use the buttons to select the type of picture format, either

4 : 3 format or

16 :9 format.

Confirm by pressing two times.

Screen

Use thebuttons to select the type of screen display:

conventional (P/S) = standard representation for 4:3 units or

widescreen picture (letter box display off) - in this settings, the widescreen is required for the 16:9 unit.

Confirm by pressing two times.

A/V mode

Here, you use the buttons to select the type of video signal which is present on the Scart socket. Select the signal which your TV set is able to process.

Observe the operating instructions of your television set!

FBAS –composite baseband signal (colour-/picture-/blanking-/synchronising- signal)

RGB – red-/green-/blue-signal

Y/C – S-VHS signal (luminance/chrominance).

Confirm by pressing two times.

33

Image 33

Contents Order no Page Important Notes Safety InstructionsFirst time operation Oscillator frequency L.O Changing the oscillator frequency Remote frequency Important notes regarding operation Operating elements, displays and connections View of front panel View of rear panelFlap folded down Remote control handset keys Connection and putting into operation Second receiver on the command setMenu concept Button functionsAlphanumeric entries Language selection- OSD Operating instructionsPresetting of receiving system Preconditions for receiving digital signalsTo connect receiver Sat-IF connectionLNB-supply voltage Inserting batteries in the remote controlTV and video recorder connection Audio connectionFirst steps Factory setting of receiverImportant on-screen displays Programme selectionSelecting a TV programme Radio programme listReception status On-screen displays On Screen Display Switching over to radio programmeSelecting a TV programme by number entry Reception status radioSelecting a radio programme by number entry VPS signal Timer-settingsEPG timer programming Programme overviewFull EPG Setting the volume Sound settingsStereo and two-channel sound reproduction MuteProgramme lists Selecting programmes last receivedFavourite programmes To delete a programme To sort the channelsTo add a programme manually Incorrect parameter Satellites add/remove Setting up a satelliteTo enter a name To remove satelliteFactory setting PasswordEntering a password Parental lockSame accounts for transponder exchange Operation from the front panel Backup operationSystem parameters Setting system parametersTV type Summer timePicture format ScreenOSD trans OSD colourInstallation menu LNB configuration10,7…11,7 GHz Low-band Low-band / analogue transmis Sion Changing the oscillator frequency Satellite search Antenna settingsTransponder selection TP set-up/searchDiSEqC UFO Set-up ErrorKHz signal High/Low Pos. A/B Tone Burst Tone burst Opt. A/B Factory setting Playback Recording„Display info Preparation Transferring programme listsTransferring operating software Technical features Technical annex Technical dataScart socket assignments AccessoriesConnection arrangement Connection examplesVHF/UHF VCR LNB DiSEqC components Short technical lexiconEb/No ratio Programme packageTransponder Symbol rateVideo bit rate ViterbirateService SatelliteDiSEqC menu 998.6246/1001/ZWT/ Subject to technical changes