Kathrein UFD 505 manual Selecting a radio programme by number entry

Page 20

On-screen displays On Screen Display

programme and by pressing the buttons you jump to the neighbouring page or enter-in the channel number with the buttons on the remote control. Confirm your

programme selection by pressing the button, press the button to exit the programme list and remain in the programme already set.

Selecting a radio programme by number entry

	You can select a different radio programme during a current radio programme by
	entering the programme location number. Use the number buttons to for
	the purpose of entering the programme location number.
Example	You wish to select the radio programme "DLR-Berlin". This programme is stored
	under the programme location number 015. (The order of radio programmes is de-
	fined in the programme memory and therefore only serves as an example here.)
	To select this programme, press the numbers and one after the other. The
	receiver waits for about 3 seconds for entry of the next number.
	Follow the same procedure for all other programmes – i.e. also programmes with
	three-digit programme location numbers. You do not have to enter leading zeros.

20

Image 20

Contents Order no Page Safety Instructions Important NotesFirst time operation Oscillator frequency L.O Changing the oscillator frequency Remote frequency Important notes regarding operation Operating elements, displays and connections Flap folded down View of front panelView of rear panel Remote control handset keys Second receiver on the command set Connection and putting into operationAlphanumeric entries Menu conceptButton functions Operating instructions Language selection- OSDPreconditions for receiving digital signals Presetting of receiving systemTo connect receiver Sat-IF connectionInserting batteries in the remote control LNB-supply voltageTV and video recorder connection Audio connectionFactory setting of receiver First stepsProgramme selection Important on-screen displaysReception status Selecting a TV programmeRadio programme list Switching over to radio programme On-screen displays On Screen DisplaySelecting a TV programme by number entry Reception status radioSelecting a radio programme by number entry Timer-settings VPS signalFull EPG EPG timer programmingProgramme overview Sound settings Setting the volumeStereo and two-channel sound reproduction MuteFavourite programmes Programme listsSelecting programmes last received To sort the channels To delete a programmeTo add a programme manually Incorrect parameter Setting up a satellite Satellites add/removeTo enter a name To remove satellitePassword Factory settingEntering a password Parental lockSame accounts for transponder exchange Backup operation Operation from the front panelSetting system parameters System parametersSummer time TV typePicture format ScreenOSD colour OSD trans10,7…11,7 GHz Low-band Low-band / analogue transmis Sion Installation menuLNB configuration Changing the oscillator frequency Antenna settings Satellite searchTP set-up/search Transponder selectionError DiSEqC UFO Set-upKHz signal High/Low Pos. A/B Tone Burst Tone burst Opt. A/B Factory setting Recording Playback„Display info Transferring operating software PreparationTransferring programme lists Technical features Technical data Technical annexAccessories Scart socket assignmentsConnection examples Connection arrangementVHF/UHF VCR LNB Short technical lexicon DiSEqC componentsEb/No ratio Programme packageSymbol rate TransponderVideo bit rate ViterbirateDiSEqC menu ServiceSatellite 998.6246/1001/ZWT/ Subject to technical changes