Kathrein UFD 505 manual Error, DiSEqC UFO Set-up

Page 39

Installation menu

After an unsuccessful search the following message appears:

Error

All new programmes are added to the existing programme list.

Under the menu item „Delete TP“ you can remove the transponder from the pro-

gramme memory by pressing . You will be requested to confirm that you wish to remove the transponder before it is deleted.

DiSEqC (UFO) Set-up

You should only make changes in this menu when the receiver is to be connected to another receiving system with different features or if changes have been made to the receiving system.

Therefore, take particular note of the information relating to your Sat-IF system. Be- fore making any changes, you should make a note of these settings on the form provided at the end of this User's Guide.

Press the menu buttons , and to open the DiSEqC menu.

22-kHz signal

In this menu point you can determine whether the 22 kHz signal is to be used to switch over between the low and high frequency range of a satellite or between 2 satellite positions.

Tone-burst and DiSEqC signal

A DiSEqC control signal is necessary if more than four control criteria are required in a receiving system.

Which of the setting options, i.e. tone burst or DiSEqC, is required depends on the components of the receiving system.

Therefore refer to the description of the components (switchover matrices) of the receiving system.

39

Image 39

Contents Order no Page Important Notes Safety InstructionsFirst time operation Oscillator frequency L.O Changing the oscillator frequency Remote frequency Important notes regarding operation Operating elements, displays and connections View of front panel View of rear panelFlap folded down Remote control handset keys Connection and putting into operation Second receiver on the command setMenu concept Button functionsAlphanumeric entries Language selection- OSD Operating instructionsSat-IF connection Preconditions for receiving digital signalsPresetting of receiving system To connect receiverAudio connection Inserting batteries in the remote controlLNB-supply voltage TV and video recorder connectionFirst steps Factory setting of receiverImportant on-screen displays Programme selectionSelecting a TV programme Radio programme listReception status Reception status radio Switching over to radio programmeOn-screen displays On Screen Display Selecting a TV programme by number entrySelecting a radio programme by number entry VPS signal Timer-settingsEPG timer programming Programme overviewFull EPG Mute Sound settingsSetting the volume Stereo and two-channel sound reproductionProgramme lists Selecting programmes last receivedFavourite programmes To delete a programme To sort the channelsTo add a programme manually Incorrect parameter To remove satellite Setting up a satelliteSatellites add/remove To enter a nameParental lock PasswordFactory setting Entering a passwordSame accounts for transponder exchange Operation from the front panel Backup operationSystem parameters Setting system parametersScreen Summer timeTV type Picture formatOSD trans OSD colourInstallation menu LNB configuration10,7…11,7 GHz Low-band Low-band / analogue transmis Sion Changing the oscillator frequency Satellite search Antenna settingsTransponder selection TP set-up/searchDiSEqC UFO Set-up ErrorKHz signal High/Low Pos. A/B Tone Burst Tone burst Opt. A/B Factory setting Playback Recording„Display info Preparation Transferring programme listsTransferring operating software Technical features Technical annex Technical dataScart socket assignments AccessoriesConnection arrangement Connection examplesVHF/UHF VCR LNB Programme package Short technical lexiconDiSEqC components Eb/No ratioViterbirate Symbol rateTransponder Video bit rateService SatelliteDiSEqC menu 998.6246/1001/ZWT/ Subject to technical changes