On-screen displays On Screen Display

Selecting a TV programme by number entry

	You can select a different TV programme during a current TV programme by enter-
	ing the programme location number.
	Use the number buttons to for the purpose of entering the programme lo-
	cations.
Example	You wish to select the TV channel "DSF". This programme is stored under the pro-
	gramme location number 015. (The order of TV programmes is defined in the pro-
	gramme memory and therefore only serves as an example here.)
	To select this programme, press the numbers and one after the other. The
	receiver waits for about 3 seconds for entry of the next number.
	Follow the same procedure for all other programmes – i.e. also programmes with
	three-digit programme location numbers. You do not have to enter leading zeros.

Switching over to radio programme

You can switch over from a TV programme to a radio programme.

Press the button on the remote control for this purpose.

The receiver switches over to the programme location of the radio programmes last

set. You can return to the TV programme by pressing the same button or . The corresponding display relating to the received programme, i.e. as when selecting the TV programmes, appears on the screen. The LCD display shows a small "r" together with the programme location number.

The screen will be blanked out after several seconds.

Reception status - radio

After switching over the receiver, simply

press the buttons to select other radio channels in their ascending or descending order in the channel memory.

Every time you press the button, an on-

screen display shows you the selected channel together with the time, the pro- gramme start and end times as well as the programme title in the information box provided this data is transmitted together with the signal.

By pressing the button, you can leave this information box permanently displayed or switch it off by pressing the button once again.

A further option of selecting a different

programme is to press the button. The radio programme list is now displayed. In the left column it will provide information relating to the received satellites, the transponder and its transmission fre-

quency, the polarisation, the symbol rate and the scrambling. The right side shows the programme number, the programme broadcaster and the type of reception sig-

nal (free-to-air/ scrambled). By pressing the buttons you jump to the next