Programme selection
the programme is normally scrambled. The required programme can be selected with the bar cursor and confirmed by pressing the button.
Radio programme list
See above. The same applies to the radio programme list. Programme selection
This section describes how you select analogue and digital TV programme with your receiver and how you can set the required volume. This description of the functions assumes that the receiver has been connected correctly.
If you wish to connect the receiver yourself, please read the section "Connection and
Selecting a TV programme
Reception status
The following information describes how to select other channels and shows what the
After switching on the receiver, simply
press the buttons in order to select other TV programmes in their ascending or descending order in the channel memory.
Every time you press the button, an
By pressing the button, you can leave this information box permanently dis- played or switch it off by pressing the button once again.
You will receive the "channel scrambled" message for scrambled channels.
You cannot view a scrambled channel. However, some broadcasters occasionally
transmit unscrambled programme blocks.
A further option of selecting a different
programme is to press the button. The TV channel list is now displayed. In the left column, it will provide information relating to the received satellites, the transponder and its transmission frequency, the polarisation, the symbol rate and the scrambling. The programme number, the programme broadcaster and the type of reception signal (free
With the buttons you jump to the next programme, with the buttons you jump to the neighbouring page or with the buttons on the remote control enter
the programme number (Ch). Confirm your selection by pressing the button.
Press the button to exit the programme list and remain in the already pro- gramme set.
18