Kathrein UFD 345 manual Features

Features

The UFD 345 receiver is equipped with the following features:

∙200-channel memory for TV programmes, freely programmable

∙99-channel memory for radio programmes, freely programmable

∙Low-threshold tuner for picture optimisation when reception is poor

∙Selectable oscillator frequencies allow troublefree matching to feed systems with divergent oscillator frequencies.

∙Detachable infrared sensor permits concealed installation of the receiver

∙Dimensions are small

∙Radio button

∙Stereo / Dual tone switchover

∙Audio frequency range from 5.0 MHz to 8.8 MHz

∙Sound muting and volume control

∙Dynamic noise reduction (DNR) Wegener-Panda 1

∙Stereo reception

∙On-screen display (OSD) 3 languages (German, English, French)

∙22-kHz control signal, programmable

∙DiSEqC 1.0 and tone-burst control signal

∙LNB supply voltage can be turned off

∙Runs off 12-24 VDC for mobile use

∙Comes with additional power pack for mains operation

∙Connecting socket for data copying function

(programme data read-in and read-out with the “Copy Programmer”)

∙Programme swap, sort and copy functions

∙Infrared remote control with command set changeover (allowing operation of two receivers in a room)

∙3 Scart sockets for TV-, VCR- and decoder connection

∙Last-status memory

26