Decoder menu, Programme name | Kathrein UFD 345 specification

Programming TV programmes

(9750 MHz).

The LO frequency groups are also used for satellite recognition during fully auto- matic adjustment with our HDP 150 automatic positioner.

For this the individual satellites are assigned the following LO groups:

Satellite	LO group

Astra	LO 1
Eutelsat 13°	LO 2
Eutelsat 10°	LO 3
Eutelsat 16°	LO 4

To change the LO frequencies refer to the initial setup menu.

Decoder menu

You can attach a decoder to the decoder Scart socket for a Pay-TV programme.

The receiver recognises Pay-TV programmes for which decoders supply a switch- ing signal (e.g. like Premiere) independently, and switches this signal through to the TV- and VCR Scart socket.

For decoders that do not supply a switching voltage the following setting is to be carried out.

	∙ Call up the video setup menu,
	∙ Select menu entry “Decoder menu“,
	∙	Activate the “Decoder menu“.,
	∙ Set the video signal path to external,
	∙ Set the audio signal path to external only if audio signal is encoded as well.
Note	If the decoder connected requires a baseband signal with PAL- or MAC-de-
	emphasis, a setting of baseband PAL or baseband MAC needs to be made in
	menu entry "Signal type" (take note of decoder specification).
	∙	Save the settings with the	key (press twice).

Programme name

In the “Programme name“ line, you can enter a 5-character station identifier of your choice.

∙Using the key select the menu entry: “Programme name“.

∙Using the keys select the first character.

∙with the key move on to the next character..

∙Select the remaining characters in the same way.

∙Change to the “Audio menu” with the key.

∙Press the key to return to reception mode.