Kathrein UFD 345 manual Adjusting volume, balance and tone, Muting the sound

Receiver operation

Note	With the setting “2- or 3-digit programme selection” there is a switch to the desired
	programme after approximately 3 seconds. Digits can be entered during this time
	period.
	With the setting “free programme selection“, the receiver switches to the corre-
	sponding programme slot immediately after each input. (see example above).
	In the initial setup menu, a continuous on-screen display of the programme slot can
	be selected (see section: “Initial settings, On Screen Displays “).

Adjusting volume, balance and tone

∙If you press one of the keys the following menu appears for adjustment of the volume, balance, tone (treble and bass), stereo-width and pseudo-stereo:

!9ROXPH

ODQFH

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

7UEOH

%DVV

￿￿

3VHXG6WUHRZLGWK￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿6WHUHR￿ 2))

	With the	keys or the	key you can select the respective menu entry
	and then makes changes with the		keys.
	The settings are not operative at the VCR Scart socket in order not to disturb video
	recordings.
	The on-screen display is removed again after approximately 3 seconds.
Note	In the menu entry “Stereo Width" the stereo base width can be adjusted independ-
	ently.

“Pseudo-Stereo" can be used to simulate a “stereo-like” effect with mono pro- grammes, and should thus only be activated with mono reception.

The “pseudo-stereo” effect can be simulated if a stereo programme is switched to mono.

Muting the sound

∙Press the key.

	The sound is muted, allowing you to make a phone call undisturbed, for example.
	∙ Press the	key again to turn the sound back on.
Note	Mute is not operative at the VCR Scart socket.

11