Kathrein UFD 345 manual Radio Setup Menu, Possible setting

Page 30

Menu structure

Radio Setup Menu

Return (stepwise) into normal programme mode with key

Save settings with key (press twice) Select menu entries with

Make the setting with or with the numeric keys for frequency setting

Radio Setup Menu

call up with key STORE + RADIO

Programme slot

Satellite frequency

Polarisation

Orbit position

Video dev.

Oscillator

Audio mode

Audio frequency

Audio- de-emphasis

"Audio de-emphasis" only with

"Mono wide" active!

Possible setting:

Step on to the next programme slot

Settable in the range von 10700..12747 MHz

Vert. Low, Vert. High

Hor. Low, Hor. High

Position 1, 2, 3 or 4

16 or 25 MHz

LO 1, 2, 3 oder 4

Stereo/

Mono narrow

Mono breit

5.00 ....8.80 MHz

DNR (Stereo, Mono narrow) 50 us / J 17 (Mono wide)

30

Image 30
Contents Kathrein Satellite Receiver UFD Contents Controls, displays and connections Remote control handset keys Front panelRear panel connections Safety instructions Important notes regarding operationImportant notes for siting and installation Connecting up the unit Connecting up and putting into operationInstalling the receiver Power supplySatellite signal connection Receiving system presetsInserting batteries into remote control handset TV and video recorder connection VCRDecoder connection Receiver operation Switching the unit onSwitching between TV and radio mode Selecting a programmeAdjusting volume, balance and tone Muting the soundVideo recorder playback VCR Operating the receiver without remote controlStereo- / Mono- / Channel changeover SAT/TV changeoverDisplaying the Info menu and programme overview Displaying InfoPicture optimisation when reception is weak Programme overviewTuning in TV programmes Programming TV programmesVideo menu Polarisation Satellite frequencyPolarisation/Orbit position Orbit positionDecoder menu Programme nameAudio frequency Audio modeAudio menu Audio de-emphasis for sound type Mono wide onlyInitial settings Tuning in radio programmesRadio menu Calling the initial setup menu LNB supply voltage in standby OSD languageLNB supply voltage Programme selectionOscillator frequency Changing the oscillator frequencySettings in the DiSEqC DiSEqC menuTone burst KHz signalTone-burst and DiSEqC-signal DiSEqCSwitching over remote control’s command set DiSEqC RepeatRemote Features Specifications Scart socket assignments Temperature rangeAccessories GeneralVideo- and Audio Setup Menu Menu structureRadio Setup Menu Possible settingInitial Setup Menu Connection example / Service note Service notePage 9985.729/0,5/06.98/SKS/PF Subject to alterations