Technicolor - Thomson RCR311B manual Using the Remote to Control Your Components, On-screen Menus

ON•OFF

ON•OFF

(BLINK)

GO BACK

4.Release both keys. The illuminated ON•OFF key remains on.

5.Starting with the number 1 key, press and release each number key on the keypad in the following order (1-9, then 0). The number that causes the ON•OFF key to light up is the first number of the code. As you find each number of the code, refer to the code boxes on the next page and write them down for future reference.

Note: All TV codes begin with the number 1; all VCR codes begin with the number 2; all DVDs, the number 3; and all satellite receivers and cable boxes, the number 5.

6.Repeat step 5 until you have retrieved all four numbers in the code.

7.After the fourth number is retrieved, the illuminated ON•OFF key blinks briefly, then turns off.

8.To exit the Code Retrieval Mode, press and release the GO BACK key at any time.

9.If you press an invalid key during the Code Retrieval process, the remote will not respond and the illuminated ON•OFF key will not blink. If you do not press a valid Code Retrieval key (TV, VCR•DVD, SAT•CBL, INFO, GO BACK), Code Retrieval times out after 15 seconds. The illuminated ON•OFF key blinks four times, and then turns off.

TV CODE

1

VCR CODE DVD CODE

2 3

SAT CODE

CBL CODE

5

5

Using the Remote to Control

Your Components

Because this remote controls more than one component, you must first “tell” the remote which component you wish to operate. That means, if you wish to operate your TV, you must first press the TV key to put the remote in the TV Mode.

The remote stays in the chosen component mode (such as TV Mode) until you change it. If your remote is in TV Mode, you must change the mode in order to operate your DVD or VCR, satellite receiver or cable box. For example, if you are in VCR Mode, and you wish to turn off your TV, you must press the TV key first before pressing the ON•OFF key.

On-screen Menus

Accessing and Selecting Menu Items

Today’s advanced components use on-screen menus to help you navigate through all their features and functions. While this remote cannot access every menu system of every component model, it does offer some menu functionality.

To use a component’s on-screen menu system, you first have to put the remote in Menu Mode.

11