Illuminated Onoff Key | Technicolor - Thomson RCR311B guide

Illuminated ON•OFF Key

Programming the Remote

Programming Methods

Brand Code Search and Entry

		The ON•OFF key powers components on and
	ON•OFF	off. It also lights up to serve as an indicator
		light, providing feedback for various functions.
		When a valid key is pressed, the illuminated
		ON•OFF key remains lit as long as the key is
	ON•OFF	pressed and turns off when the key is released.
	ON•OFF	The ON•OFF key also blinks in Programming
		Mode or in Menu Mode to provide feedback.
		For example, when programming your remote
		via one of the programming methods, the
	(BLINK)	illuminated ON•OFF key blinks each time
	(BLINK)	a valid key is pressed.
		a valid key is pressed.

Your universal remote can operate a variety of brands of components. In order for your universal remote to control your components, you need to program the remote with the codes that match the components (see Code Lists enclosed). These codes enable the remote to communicate with your components. Each brand and each component has its own “language,” and, by programming the correct codes into your remote, you tell the remote to “speak the same language”as your components.

There are four methods you can use to program your remote control to operate your components: Brand Code Search and Entry, Direct Code Entry, Manual Code Search and Entry, and Auto Code Search and Entry. Most components can be programmed in one of these four ways. Try them in the order listed.

The three-component universal remote is already programmed to operate most RCA, GE and PROSCAN branded TVs, DVD players and satellite receivers.

In order to control combo TV/VCR or TV/DVD units, you must program both the TV key and the VCR•DVD key. Once programmed successfully, the TV key controls the TV functions on your unit, and the VCR•DVD key controls the VCR or DVD functions. There is a specific section in the Code Lists for combo units. The codes in this section should be tried first, using Direct Code Entry on the TV and VCR•DVD keys. If this is unsuccessful, follow the normal programming methods for both the TV and the VCR•DVD keys.

To exit without saving at any

point in the Brand Code Search, press

point in the Brand Code Search, press

and release the GO BACK key.

If your brand is listed in the Brand Code List (See Code Lists enclosed), you may be able to program your universal remote by searching through only the Code Lists for that specific manufacturer. Brand Code Search and Entry can be the quickest method to program your remote, if your component (TV, VCR and/or DVD, satellite receiver and/or cable box) is one of those brands listed.

If your brand is not listed in the Brand Code List, use one of the other programming methods: Direct Code Entry, Manual Code Search and Entry or Auto Code Search and Entry.

Follow these instructions to program your remote using the Brand Code Search and Entry method.

1.Manually turn on the component you want the remote to control (TV, VCR, DVD, satellite receiver or cable box).

2.Locate the Brand Codes in the Code Lists and keep it handy.

Note: If you press an invalid key during the Brand Code Search, the remote does not respond and the illuminated ON•OFF key does not blink. If you do not press a valid