Installation Instructions | iCMPFM1S/iCMPFM1B |
3
2X2
3(D) X2
1(A, B) X2
C
4
INSTALL DISPLAY TO WALL PLATE
WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components attached to the iCMPFM1 does not exceed
100 lbs (45 kg).
WARNING: Display may be very heavy! Ensure display can be safely lifted and maneuvered as required to install on wall plate. Failure to take adequate precautions can result in serious personal injury or damage to equipment!
1.Hang display with brackets (A and B) on upper rail of wall plate (C). Center display on rail.
2.Close both left and right display latches.
3.Using Phillips screwdriver, install screws (D) into left and right side display latches.
4.OPTIONAL: Install padlock (not included) in the left and/or right side display latches (upper or lower holes).
13