Olympus W-10 manual Using the Variable Control Voice Actuator Vcva, Press the +/9 or -/0button to

Using the Variable Control Voice Actuator (VCVA)

When the microphone senses that sounds have reached a preset volume, the built-in Variable Control Voice Actuator (VCVA) starts recording automatically, and stops when the volume drops. Particularly helpful for extended recording, the VCVA not only conserves memory by turning off recording during silent periods, but also makes playback more efficient and convenient.

2,4 1

1 Press and hold the MENU/FOLDER button for 1 second or longer.

The menu opens (☞ P.26).

2 Press the +/9or –/0button until “VCVA” flashes on the display.

6	Press the PLAY button.
	The VCVA setup process begins.
	3 Press the +/9 or –/0button to
5	choose between On and OFF.
	4 On : Will start recording in VCVA mode.
3	OFF : Will resume recording in normal mode.
	Press the STOP button.
	5 The menu screen closes and “END” flashes.

6 Press the REC button to start recording. When the VCVA senses sound louder than the preset volume, recording starts a automatically. When it senses silence, recording automatically pauses after approximately 1 second, and the recorder

enters Standby mode.

aVCVA indicator

Using the

Variable Control

Voice

Actuator (VCVA)

The record indicator lamp is lit during recording. When the recorder is in standby mode, the record indicator lamp flashes, and VCVA and the record (s) indicator flash on the display.

..............................................................................................................

Note

To ensure successful recordings, we recommend that you test the record

function and volume before use. 13