Olympus W-10 manual Starting Voice Album

1

2

Starting Voice

Album

1 Insert end A of the USB cable to your PC's USB port or USB hub.

2 Confirm that the recorder is not in use before attaching end b of the USB cable to the PC terminal port of the recorder.

• Release the HOLD switch on the recorder and make sure that the recorder is in stop mode before plugging in the USB cable.

When the recorder and the PC are connected with the USB cable, the recorder display alternately flashes “PC” and “LINK”.

To use Voice Album without connecting the recorder to the PC, or if Voice Album does not start automatically when you connect the recorder to the PC, click on the [Start] button, point to [All Programs], select [OLYMPUS Voice Album] then click on [OLYMPUS Voice Album].

To exit Voice Album, click on the button on the window, or click on [File], and then click on [Exit Voice Album].

......................................................................................................

Notes

•When you start Voice Album for the first time by connecting the recorder to the PC after installation, it may take a few minutes to start.

•When the recorder is connected to the PC, the recorder accommodates only Voice Album operations.

•Do NOT use any USB cable other than the one supplied.

•Do NOT disconnect the USB cable before file transfer or recording is completed.