Olympus DS-5000iD manual Charging Battery Pack, Battery Pack using the Cradle

Page 18

Charging Battery Pack

 

 

You can charge the Ni-MH Rechargeable

 

 

Battery Pack in the recorder using the cradle

 

 

in combination with the USB cable or AC

 

 

Adapter. Or by directly connecting the AC

 

 

Adapter or USB cable to the recorder.

 

 

Battery pack need to be fully charged before

1

 

first use.

 

 

Full charge time: Approximately 3 hours.

Charging

 

Battery Pack using the Cradle

 

 

Charge the Ni-MH Rechargeable

Battery

 

 

 

recorder can be charged by connecting the AC

Pack

 

The Ni-MH Rechargeable Battery Pack in the

 

recorder set in it.

 

 

adapter or USB cable to the cradle with the

 

 

 

 

 

Charging using Cradle and AC Adapter

 

 

Connect the AC adapter to the cradle.

 

 

For connection procedures, see P.75.

 

 

When using the AC adapter for charging, connect the

 

 

power plug to the cradle AC connector (☞ P.21).

 

 

Firmly press the recorder all the way into

 

 

the cradle as shown in the illustration.

 

 

CHARGE indicator light glows red and the charging

 

 

starts.

 

 

The light goes out when the charging is complete.

CHARGE indicator light

Charging using Cradle and USB Cable

Connect the USB cable to the cradle.

For connection procedures, see P.75.

Turn the recorder’s POWER switch OFF (☞

P.22), then firmly press the recorder all the way into the cradle as shown in the illustration.

CHARGE indicator light glows red and the charging starts.

The light goes out when the charging is complete. When the recorder is connected to a USB cable while its POWER switch is turned OFF, only charging will be performed, and the computer will not recognize it as a drive.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents
DS-5000 DS-5000iD IntroductionI tr ti TrademarksGetting Started Advanced OperationsOther Practical Use Methods Table of Contents Table of Contents Convention Used In this Manual Important Safety PrecautionsSafe and Proper Usage Signifies danger which may result in seriousGeneral Precautions Batteries/Rechargeable Battery PackGeneral Precautions CradleInjury AC Adapter General Precautions Main Features Priority Setting P.52 DSS Player software included P.69Main Features Memory Card Compatible CardsMemory Sizes of Cards and Approximate Recording Times*1 Memory Card Check Card Information Card Info Identification of Parts PartsVcva Variable Control Voice Erase Lock indicator Display Status Indicators8Microphone sensitivity indicator Actuator indicatorRecharging Battery Pack Installing BatteriesNi-MH Rechargeable Battery Pack included Release button, then open the batteryAAA Alkaline Batteries Installing BatteriesBelow, then close the battery cover Replacing BatteriesCharging using Cradle and USB Cable Charging Battery PackBattery Pack using the Cradle Charge the Ni-MH RechargeableCharging using the USB cable no cradle Charging Battery PackCharging using AC Adapter no cradle Directly Charging Through the RecorderUsing the Battery Pack For customers in GermanyUsing the AC Adapter Detecting abnormal voltageAC Adapter Power Save Setting Turning on RecorderMode Ejecting a SD card Inserting and Ejecting a SD cardInserting a SD card Push the SD card inward once to unlock it, and let it ejectPress the 9 or 0 button to select the item to set Setting Time and Date Time & DateSetting Time and Date Press the + or button to setPress the OK/MENU button to complete the setup screen Setting Time and Date Time & DateSet it using the procedure below Changing the Time and DateScreen, then press the OK/MENU or Setting Recording Destination Card SelectPress the + or button to select SD or micro SD ButtonRecord Function Recording Related SettingsRecording RecordingPress the NEW button to create a new RecordingNew Recording FileSelect and play the file you want to overwrite Move the slide switch to the StopOverwrite Recording 10M 25s00M 11s Insert Recording00H 00M 10s 00M 12sMicrophone Sensitivity Mic Sense Press the + or button to select Conference or DictationMicrophone Sensitivity Or SP Recording Modes Rec ModePress the + or button to select QP 15H 22M 40sStart recording Adjust the Start/Stop Actuation LevelWhen this is enabled, Vcva will appear on the display Set the Vcva in the menu to OnHands-free Recording Recording MonitorPlaying Playing Playback functionsPress the + button to select File ErasingErasing a File Erase, then press the OK/MENUErasing Erasing All Files in a FolderErase partially Partially Erasing a FileStart playback the file you want to Start erasing1H 20M 35s Press the Erase button to confirmErase Display changes to Partial Erase!Mic Sense Backlight Pending Lock Priority Work Type Rec ModeMenu List Contrast LanguageMenu List System InfoMenu List Device Learning to Use the Menu Press the OK/MENU buttonPress the + or button to move to Main Menu item to be set Changing Folders Selecting Folders and FilesChanging File Scroll barSelect the file whose information you want to display Displaying File InformationDisplayed Information Press the F3INFO button. The file information is displayedUnlocking the Recorder Unlocking the Recorder with a PasswordDevice Lock Function Press the OK/MENU button to select aHow to Scan the Fingerprint Device Lock FunctionDevice Lock Function Press + or button to select Enroll Authentication Halt ModeFingerprint Registration Fingerprint Then press the OK/MENU or 9buttonPress the + or to button select Erasing Fingerprint DataVerifying the Registered Fingerprint Data Verify, then press the OK/MENUPress the OK/MENU or 9button Locking Files LockSelect the file you want to Lock Press the + or button to select On or OffPending Files Pending Press the + or button to select Pending or FinishedPending Files To Set a Priority Level on a File Setting Priority Levels PriorityPerforming the Setting from the Menu To Set the F2PRIOR ButtonBy default the Author ID is set to DS5000 Setting the Author ID and Work TypeSetting an Author ID Turn on the recorderSetting the Author ID and Work Type Editing the Work TypeInputting Option Item Value Entering charactersPress the F2FINISH button Locating a Verbal Comment Setting a Verbal CommentVerbal Comment Clearing an Verbal CommentLocating an Index Mark Setting an Index MarkIndex Marks Clearing an Index MarkSetup screen Language LanguagePress the + or button to select On Complete the setup screenBacklight Backlight Or OffLED LED Press the + or button to set the contrast level LCD Contrast Adjustment ContrastDisplay contrast can be adjusted from level 01 to LCD ContrastSystem Sounds Beep System SoundsInserting a microSD card When it is Difficult to Eject MicroSD cardInserting and Ejecting a microSD card Ejecting a microSD cardFormatting Card Formatting the Card FormatOption OK/MENU, + ButtonFormatting the Card Format Initializing the Recorder’s Menu Settings Reset SettingsFormat Done displays when formatting ends Press the OK/MENU button to confirm Start selectionPress the OK/MENU, 0or F1 Back Press the F3EXIT or 0 button to complete the settingCheck System Information System info Press the F1BACK or 0 button toChanging the USB Class USB Class Press the + or button to select Composite or StorageChanging USB Class Recorder’s Customized Settings Customizing the RecorderDSS Player Software DSS Player SoftwareOperating System DSS Player SoftwareMinimum Requirement Hard drive space Drive Display USB port Audio I/O terminalsInstall Wizard will begin Installing DSS Player SoftwareBe sure to confirm the following before installation Insert Olympus DSS Player CD into the CD-ROM driveList of installed applications is displayed Uninstalling DSS Player SoftwareAn uninstaller is displayed According to the instructions onUsing Online Help Using Online HelpTo start online Help Connecting Recorder to PC Connecting to Your PC Using the USB CableSupported computers Disconnecting Recorder from PC Connecting Recorder to PCConnecting to Your PC Using the Cradle Remove the Recorder from the CradleRunning DSS Player Software Disabling Automatic StartManual Start Connecting the recorder to your PC Using as External Memory of the ComputerUnplug the recorder from a computer Other InformationI f ti Alarm Message List Nothing appears on the display TroubleshootingCannot connect to a PC using a cradle Recording level too lowAccessories AccessoriesSpecifications SpecificationsTechnical Assistance and Support Technical Assistance SupportTested To Comply With FCC Standards
Related manuals
Manual 69 pages 12.98 Kb
Top Page Image Contents