Connecting Recorder to PC

Olympus DS-5000iD manual Connecting Recorder to PC, Connecting to Your PC Using the Cradle

Page 75

Connecting to Your PC Using the Cradle

Place the recorder in the cradle

1 Connect the USB cable to the USB port of the PC.

2 The USB cable is connected with cradle as shown in figure.

3 Turn ON the recorder, then set the recorder in the cradle. If [Remote] is displayed on recorder, it indicates proper connection.

Disconnecting Recorder from PC

To avoid data corruption or loss, make sure that the recorder’s record/ play indicator light isn’t flashing, before removing the recorder from the cradle or disconnect the cable from the recorder terminal.

Remove the Recorder from the Cradle

To prevent damage or loss of the data, confirm that the recording/ playback indicator light of this recorder is not on, and remove this recorder and USB cable from the cradle.

Notes

•Never touch the contact points at the bottom of the cradle, as that may cause bad connection.

•With a PC connected, the recorder cannot be operated with the foot switch (RS27/ 28). When connecting the recorder to a PC via the cradle, remove the foot switch.

Connecting Recorder to PC

Image 75

Contents

DS-5000 DS-5000iD Trademarks IntroductionI tr tiGetting Started Advanced OperationsOther Practical Use Methods Table of Contents Table of Contents Signifies danger which may result in serious Important Safety PrecautionsSafe and Proper Usage Convention Used In this ManualBatteries/Rechargeable Battery Pack General PrecautionsGeneral Precautions CradleInjury AC Adapter General Precautions Main Features Priority Setting P.52 DSS Player software included P.69Main Features Memory Card Compatible CardsMemory Sizes of Cards and Approximate Recording Times*1 Check Card Information Card Info Memory CardParts Identification of PartsActuator indicator Display Status Indicators8Microphone sensitivity indicator Vcva Variable Control Voice Erase Lock indicatorRelease button, then open the battery Installing BatteriesNi-MH Rechargeable Battery Pack included Recharging Battery PackReplacing Batteries Installing BatteriesBelow, then close the battery cover AAA Alkaline BatteriesCharge the Ni-MH Rechargeable Charging Battery PackBattery Pack using the Cradle Charging using Cradle and USB CableDirectly Charging Through the Recorder Charging Battery PackCharging using AC Adapter no cradle Charging using the USB cable no cradleFor customers in Germany Using the Battery PackUsing the AC Adapter Detecting abnormal voltageAC Adapter Power Save Setting Turning on RecorderMode Push the SD card inward once to unlock it, and let it eject Inserting and Ejecting a SD cardInserting a SD card Ejecting a SD cardPress the + or button to set Setting Time and Date Time & DateSetting Time and Date Press the 9 or 0 button to select the item to setChanging the Time and Date Setting Time and Date Time & DateSet it using the procedure below Press the OK/MENU button to complete the setup screenButton Setting Recording Destination Card SelectPress the + or button to select SD or micro SD Screen, then press the OK/MENU orRecording Recording Related SettingsRecording Record FunctionFile RecordingNew Recording Press the NEW button to create a new10M 25s Move the slide switch to the StopOverwrite Recording Select and play the file you want to overwrite00M 12s Insert Recording00H 00M 10s 00M 11sMicrophone Sensitivity Mic Sense Press the + or button to select Conference or DictationMicrophone Sensitivity 15H 22M 40s Recording Modes Rec ModePress the + or button to select QP Or SPSet the Vcva in the menu to On Adjust the Start/Stop Actuation LevelWhen this is enabled, Vcva will appear on the display Start recordingRecording Monitor Hands-free RecordingPlaying Playback functions PlayingErase, then press the OK/MENU ErasingErasing a File Press the + button to select FileErasing All Files in a Folder ErasingStart erasing Partially Erasing a FileStart playback the file you want to Erase partiallyDisplay changes to Partial Erase! Press the Erase button to confirmErase 1H 20M 35sContrast Language Pending Lock Priority Work Type Rec ModeMenu List Mic Sense BacklightMenu List System InfoMenu List Device Learning to Use the Menu Press the OK/MENU buttonPress the + or button to move to Main Menu item to be set Scroll bar Selecting Folders and FilesChanging File Changing FoldersPress the F3INFO button. The file information is displayed Displaying File InformationDisplayed Information Select the file whose information you want to displayPress the OK/MENU button to select a Unlocking the Recorder with a PasswordDevice Lock Function Unlocking the RecorderHow to Scan the Fingerprint Device Lock FunctionDevice Lock Function Then press the OK/MENU or 9button Authentication Halt ModeFingerprint Registration Fingerprint Press + or button to select EnrollVerify, then press the OK/MENU Erasing Fingerprint DataVerifying the Registered Fingerprint Data Press the + or to button selectPress the + or button to select On or Off Locking Files LockSelect the file you want to Lock Press the OK/MENU or 9buttonPending Files Pending Press the + or button to select Pending or FinishedPending Files To Set the F2PRIOR Button Setting Priority Levels PriorityPerforming the Setting from the Menu To Set a Priority Level on a FileTurn on the recorder Setting the Author ID and Work TypeSetting an Author ID By default the Author ID is set to DS5000Editing the Work Type Setting the Author ID and Work TypeInputting Option Item Value Entering charactersPress the F2FINISH button Clearing an Verbal Comment Setting a Verbal CommentVerbal Comment Locating a Verbal CommentClearing an Index Mark Setting an Index MarkIndex Marks Locating an Index MarkLanguage Language Setup screenOr Off Complete the setup screenBacklight Backlight Press the + or button to select OnLED LED LCD Contrast LCD Contrast Adjustment ContrastDisplay contrast can be adjusted from level 01 to Press the + or button to set the contrast levelSystem Sounds System Sounds BeepEjecting a microSD card When it is Difficult to Eject MicroSD cardInserting and Ejecting a microSD card Inserting a microSD cardOK/MENU, + Button Formatting the Card FormatOption Formatting CardPress the OK/MENU button to confirm Start selection Initializing the Recorder’s Menu Settings Reset SettingsFormat Done displays when formatting ends Formatting the Card FormatPress the F1BACK or 0 button to Press the F3EXIT or 0 button to complete the settingCheck System Information System info Press the OK/MENU, 0or F1 BackChanging the USB Class USB Class Press the + or button to select Composite or StorageChanging USB Class Customizing the Recorder Recorder’s Customized SettingsDSS Player Software DSS Player SoftwareHard drive space Drive Display USB port Audio I/O terminals DSS Player SoftwareMinimum Requirement Operating System Insert Olympus DSS Player CD into the CD-ROM drive Installing DSS Player Software Be sure to confirm the following before installation Install Wizard will beginAccording to the instructions on Uninstalling DSS Player SoftwareAn uninstaller is displayed List of installed applications is displayedUsing Online Help Using Online HelpTo start online Help Connecting Recorder to PC Connecting to Your PC Using the USB CableSupported computers Remove the Recorder from the Cradle Connecting Recorder to PCConnecting to Your PC Using the Cradle Disconnecting Recorder from PCRunning DSS Player Software Disabling Automatic StartManual Start Connecting the recorder to your PC Using as External Memory of the ComputerUnplug the recorder from a computer Other InformationI f ti Alarm Message List Recording level too low TroubleshootingCannot connect to a PC using a cradle Nothing appears on the displayAccessories AccessoriesSpecifications SpecificationsTechnical Assistance Support Technical Assistance and SupportTested To Comply With FCC Standards

Related manuals

Olympus DS-5000iD manual Connecting Recorder to PC, Connecting to Your PC Using the Cradle