Changing the USB Class (USB Class)
You can set the USB class of this recorder with a USB connection to [Composite] or [Storage]. Set to [Composite] when using this recorder as a USB speaker or a USB microphone.
F1, F3 button
OK/MENU,+,
1 | Select [USB Class] at the [Device Menu] |
screen, then press the OK/MENU or |
9button.
Refer to P.42 regarding each menu item settings.
Device Menu
Fingerprint
Card Select
Beep
Format
12
USB Class
Time & Date
BACKEXIT
2 Press the + or – button to select [Composite] or [Storage].
Composite...In the 3 classes of Storage, USB audio and human interface, USB connection is possible. While USB connection in [composite], the recorder can be used as the USB speaker and the USB microphone. Storage...USB connection is possible in only Storage class.
USB Class
Composite
Storage
BACKEXIT
3 Press the OK/MENU button to complete the setup screen.
[Composite Set] or [Storage Set] will light up on the display, and it will return to the [Device Menu] screen.
If press the 0or F1(BACK) button the setting will be cancelled and it will return to the [Device Menu]. Pressing the F3(EXIT) button will cancel the contents being set and take you out of the MENU.
USB Class
Composite
Storage
Composite
Set
BACKEXIT
4 Press the F1(BACK) or 0 button to return to the [Main Menu] screen, then press the F3(EXIT) or 0 button to complete the setting.
When this recorder is connected to the computer for the first time after being changed to “Remote(Composite)”, the driver will be installed automatically to the computer.
3
Changing the
USB Class
67