NetComm NP3640 manual IPP Client Setup Windows 95/98/Me/NT 4.0/XP, Installing from the CD-ROM

Page 49

IPP Client Setup - Windows 95/98/Me/NT 4.0/XP

The IPP Client Software can be installed on any of the following systems:

■Window 95/98/Me/2000/XP

■Windows NT 4.0

Installing from the CD-ROM

1.Insert the CD-ROM in your drive. If the program does not start automatically, run the SETUP program in the top-level folder.

2.Follow the prompts until you reach the Select Installation screen, and select IPP Client.

3.At the next screen, select the Install IPP Client option.

4.Click Next, and step though the remaining screens to complete the installation.

Installing using IPP_CLIENT.EXE

1.Run this program to unzip the included files.

2.The IPP Setup program will then run.

3.Follow the prompts to complete the installation.

IPP Client Configuration (Windows 95/98/ME/2000/XP/NT 4.0)

1.Run the "Add IPP Port" program entry created by the installation. A screen like the following will be displayed.

2.If Internet access from your location is via a Proxy Server, check Access IPP Server via Proxy Server, and enter details of your Proxy Server. (This will be the same as your Browser configuration.)

3.Enter the IP Address or URL of the IPP Server.

4.Click Select Device Port to view the available ports on the IPP Server, and select the appropriate port. A connection to the IPP Server will be established at this time.

Rev. 1 - YML657	www.netcomm.com.au
NP3640 Fast Ethernet Mini Print Server User Guide	Page 49

Image 49

Contents Page Contents Introduction Connecting your Mini Print Server LED Indicators Diagnostic Push ButtonGreen LED Red LED Description Yellow LED Orange LED DescriptionConfiguration Methods Configuring your Mini Print ServerAdvanced Configuration and Management Web Based Configuration and ManagementProcedure Using the Windows WizardRev YML657 Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Printing Methods Configuring your ComputersWhich printing method should I use? Checking your Network Protocols Windows Windows Peer-to-peer Printing Windows 2000/XP SetupRev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Windows 9x/ME Setup Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Management Advanced Port Options Windows SMB Printing Printing from MS-DOS Programs Capture SettingsWindows with Server-based Print Queues Choose Standard TCP/IP Port, then click New Port Windows LPR PrintingAdvanced Setup and Management AppleTalk SetupMacintosh AppleTalk PrintingMacintosh OS LPR printing SetupInstallation BiAdmin Management UtilityRequirements Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Device Status IconsPrinter Status Upgrade ConfigurationWizard Menus System Tab ConfigurationTCP/IP Tab AppleTalk Tab NetBEUI Tab Internet Printing Tab Physical Port Port TabLogical Port NetWare Snmp Tab Preparation Web-Based ManagementConfiguration Screens Connecting to the Print ServerServer Status Configure Server AppleTalk NetBEUI Connection TCP/IPPrint Server Mode Remote Printer ModeGeneral Rev YML657 Management Stations Snmp Simple Network Management ProtocolTrap Receivers Logical Printers Internet Printing IPP Server Configuration Special FeaturesInternet Printing Protocol IPP IPP Client Configuration Windows 95/98/ME/2000/XP/NT IPP Client Setup Windows 95/98/Me/NT 4.0/XPInstalling from the CD-ROM Installing using IPPCLIENT.EXEChanging the IPP Port Settings IPP Client Setup Windows 2000/XP Using IPP Printers System Requirements Internet Mail PrintingMail Server Internet Print ServerUser Software Internet Mail Printing ConfigurationInstallation User Software Checking the Printer Driver Using the new PortPrinting through the Internet Snmp Settings Configuring the Print Server for SnmpManagement Station Settings Trap Receiving Station SettingsFax TroubleshootingHardware & LAN Problems AppleTalk Macintosh Problem, perform the following steps Novell NetWare Windows Printing Problems Click OK to see the Print Port Configuration screen, as Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Windows NT Server Network Server ConfigurationPreparing for TCP/IP Printing Adding a TCP/IP Remote PrinterEnter the appropriate logical printer number. e.g. L1 Setup Wizard Configuration Methods Bindery or NDSNovell NetWare Windows 2000 ServerConfiguration Data BiAdminOther Method GeneralOverview Setup for Ndps NetWareCreating an Ndps Manager Object Load Ndpsm Creating an Ndps Printer AgentRegistering your NetComm Product Trademarks and NoticesUnix Systems Warranty Registration Form Page Limitations of Warranty Product Warranty