BiAdmin
For more control and flexibility, or to use NetWare Remote Printer Mode, you can use the supplied BiAdmin management utility. Provided you have Novell's Client 32 installed, BiAdmin will allow you to configure the NetWare Server as well as the Print Server.
■BiAdmin is installed by the Administrator menu option on the
■See Section 5 for general information on using BiAdmin.
■The NetWare Manual (in the Manual\NetWare folder on the
Other Method
If you are unable to use
Quickset
■The program is provided on the
■The documentation for the program is provided in
Configuration Data
The Print Server requires the following "General" data, and the data for the mode (Print Server or Remote Printer) you are using.
General
Device Name | The device name (Default Server Name) is shown on a |
| sticker on the base of the device. Change this if you |
| wish. The new name MUST NOT exceed 19 characters, |
| nor contain any spaces. |
Device Password | Default is NULL (no password). |
NetWare Mode | Print Server or Remote Printer. |
Frame Type | Select the frame types used by your network. (Ethernet |
| 802.2, Ethernet 802.3, Ethernet SNAP, and Ethernet II) |
| By default, all frame types are enabled. |
Novell Remote Printer Mode |
|
Novell Printer Server for P1 | NetWare print server to service the Print Server's parallel |
| port 1. |
Novell Print Server Mode |
|
NDS Tree Name | Not applicable.(NetWare NDS mode only) |
Print Server NDS Context | Not applicable.(NetWare NDS mode only) |
Rev. 1 - YML657 | www.netcomm.com.au |
NP3640 Fast Ethernet Mini Print Server User Guide | Page 69 |