Section 9 - Network Server Configuration
Windows NT Server
Preparing for TCP/IP Printing
If using Windows NT 3.51 or Windows NT 4.0, Microsoft TCP/IP Printing Support must be installed.
■If it is already installed, proceed to Adding a TCP/IP Remote Printer.
■Otherwise, the procedure to install TCP/IP printing support is as follows.
Windows NT 3.51
1.Start the Network option in Control Panel. When the Network Settings dialog box appears, click the Add Software button to display the Add Network Software dialog box.
2.Select TCP/IP Protocol And Related Components in the Network Software list box, and then click the Continue button.
3.In the Windows NT TCP/IP Installation Options dialog box, check the TCP/IP Network Printing Support option.
4.Click the OK button. Windows NT Setup will display a message asking for the full path to the Windows NT distribution files. Provide the appropriate location and click the Continue button. All necessary files will be copied to your hard disk.
5.If you did not check the Enable Automatic DHCP Configuration option in the Windows NT TCP/IP Installation Options dialog box, you must complete all the required TCP/IP configuration procedures manually.
6.After you finish configuring TCP/IP, the Network Settings dialog box will reappear, click the Close button and then restart your computer for the changes to take effect.
Windows NT 4.0
1.Go to
2.Click the Service option and ensure that Microsoft TCP/IP Printing is enabled. If it is not enabled, select the Add option and enable it as usual.
3.If you added services in step 2, reboot the computer for the changes to take affect.
Adding a TCP/IP Remote Printer
Windows 3.51
1.From the Printer menu in Print Manager, select Create Printer.
2.In the resulting dialog box, enter data as follows:
www.netcomm.com.au | Rev. 1 - YML657 |
Page 66 | NP3640 Fast Ethernet Mini Print Server User Guide |