IPP Client Setup - Windows 2000/XP
Windows 2000 has its own IPP Client, and there is no need to install the supplied IPP Client Software. To use Windows 2000's IPP Client with the Print Server , follow this procedure:
1.Start the Add Printer wizard.
2.Select Network Printer, and click "Next" to see the Locate your Printer screen, as shown below.
3.Select Connect to a printer on the Internet or on your Intranet, and enter the URL of the IPP Server as follows, where ip_address represents the IP Address of the IPP Server, and 631 is the port number.
Port 1 | ip_address:631/ipp/P1 |
Port 2 (if exists) | ip_address:631/ipp/P2 |
Port 3 (if exists) | ip_address:631/ipp/P3 |
These entries are case sensitive. They must be entered as shown, with "ipp" in lower case, and P1, P2 and P3 in UPPER case.
4.If the connection can be established, and the printer on that port is
5.Click "OK", and then select the printer manufacturer and model to match the printer connected to the port on the IPP Server.
6.Click "Next", and complete the Wizard.
The IPP printer is now ready for use.
Rev. 1 - YML657 | www.netcomm.com.au |
NP3640 Fast Ethernet Mini Print Server User Guide | Page 51 |