NetComm NP3640 manual Creating an Ndps Printer Agent, Load Ndpsm

Page 71

8. Click Create. The new NDPS Manager will appear in the main browser window.

To start the NDPS Manager in future, enter the following command at the console:

LOAD NDPSM

then select the NDPS Manager object.

To start the NDPS Manager whenever you bring up the server, add a command like the following to your server's AUTOEXEC.NCF file:

LOAD NDPSM SerMGR.TeSupp

The last item is the name of the NDPS Manager object you wish to load.

9.After creating an NDPS Manager, you can create NDPS printers by using NetWare Administrator, as explained below.

Creating an NDPS Printer Agent

To create Public Access Printers using the NDPS Manager Object in NetWare Administrator, follow this procedure:

1.Start the NDPS Manager object you will be using to control the Printer Agent.

2.At the Identification page, click the Printer Agent List.

3.Click New to see the Create Printer Agent window, as shown below.

4.Enter the desired name for the Printer Agent (PA) Name.

5.Normally, the NDPS Manager will be the NDPS Manger object you are using.

6.Select Novell Printer Gateway in the Gateway Type. (see figure2 above)

7.Click OK and then select the available printer.

8.Select Remote (LPR on IP) in the Connection Type.

9.Click Next to see the following Configure Port Handler screen.

10.In the Host address IP field, enter the IP Address previously assigned to the Print Server device.

11.In the Printer Name field, enter the Logical Port name on the Print Server. (e.g.: L1)

Note: For Print Servers with one parallel port, the logical ports are named L1, L2 and L3. For devices with three parallel ports, the logical ports are named L1 to L8.

12.Click Finish, then select appropriate drivers for Windows 3.1, Windows 95/98 etc as required.

13.The new Printer Agent will now appear in the Printer Agent List window.

Repeat this procedure for any other ports on the Print Server, or for any other logical printers you wish to use.

Client computers can now be configured as described in Section 4 - Configuring your Computer.

Rev. 1 - YML657

www.netcomm.com.au

NP3640 Fast Ethernet Mini Print Server User Guide

Page 71

Image 71
Contents Page Contents Introduction Connecting your Mini Print Server Yellow LED Orange LED Description Diagnostic Push ButtonLED Indicators Green LED Red LED DescriptionWeb Based Configuration and Management Configuring your Mini Print ServerConfiguration Methods Advanced Configuration and ManagementProcedure Using the Windows WizardRev YML657 Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Which printing method should I use? Configuring your ComputersPrinting Methods Checking your Network Protocols Windows Windows Peer-to-peer Printing Windows 2000/XP SetupRev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Windows 9x/ME Setup Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Management Advanced Port Options Windows SMB Printing Printing from MS-DOS Programs Capture SettingsWindows with Server-based Print Queues Choose Standard TCP/IP Port, then click New Port Windows LPR PrintingPrinting AppleTalk SetupAdvanced Setup and Management Macintosh AppleTalkMacintosh OS LPR printing SetupRequirements BiAdmin Management UtilityInstallation Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Printer Status IconsDevice Status Wizard ConfigurationUpgrade Menus System Tab ConfigurationTCP/IP Tab AppleTalk Tab NetBEUI Tab Internet Printing Tab Logical Port Port TabPhysical Port NetWare Snmp Tab Preparation Web-Based ManagementServer Status Connecting to the Print ServerConfiguration Screens Configure Server AppleTalk NetBEUI Connection TCP/IPGeneral Remote Printer ModePrint Server Mode Rev YML657 Trap Receivers Snmp Simple Network Management ProtocolManagement Stations Logical Printers Internet Printing Internet Printing Protocol IPP Special FeaturesIPP Server Configuration Installing using IPPCLIENT.EXE IPP Client Setup Windows 95/98/Me/NT 4.0/XPIPP Client Configuration Windows 95/98/ME/2000/XP/NT Installing from the CD-ROMChanging the IPP Port Settings IPP Client Setup Windows 2000/XP Using IPP Printers Internet Print Server Internet Mail PrintingSystem Requirements Mail ServerUser Software Internet Mail Printing ConfigurationInstallation User Software Printing through the Internet Using the new PortChecking the Printer Driver Trap Receiving Station Settings Configuring the Print Server for SnmpSnmp Settings Management Station SettingsFax TroubleshootingHardware & LAN Problems AppleTalk Macintosh Problem, perform the following steps Novell NetWare Windows Printing Problems Click OK to see the Print Port Configuration screen, as Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Adding a TCP/IP Remote Printer Network Server ConfigurationWindows NT Server Preparing for TCP/IP PrintingEnter the appropriate logical printer number. e.g. L1 Windows 2000 Server Configuration Methods Bindery or NDSSetup Wizard Novell NetWareGeneral BiAdminConfiguration Data Other MethodCreating an Ndps Manager Object Setup for Ndps NetWareOverview Load Ndpsm Creating an Ndps Printer AgentUnix Systems Trademarks and NoticesRegistering your NetComm Product Warranty Registration Form Page Limitations of Warranty Product Warranty