NetComm NP3640 manual Connecting to the Print Server, Configuration Screens, Server Status

Page 38

Connecting to the Print Server

1.Start your Web Browser.

2.In the Address box, enter HTTP:// followed by the IP Address of the Print Server. e.g.http:// 192.168.0.21

3.You will then be prompted for the password. If no password has been set, the Status screen will appear.

4.Use the menu bar to navigate the different configuration screens. Remember to save each screen before changing to a different screen.

Configuration Screens

Server Status

This screen shows server system data and the current settings for all of the other screens. It is read-only; no data can be input on this screen.

www.netcomm.com.au	Rev. 1 - YML657
Page 38	NP3640 Fast Ethernet Mini Print Server User Guide

Image 38

Contents Page Contents Introduction Connecting your Mini Print Server Green LED Red LED Description Diagnostic Push ButtonLED Indicators Yellow LED Orange LED DescriptionAdvanced Configuration and Management Configuring your Mini Print ServerConfiguration Methods Web Based Configuration and ManagementUsing the Windows Wizard ProcedureRev YML657 Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Which printing method should I use? Configuring your ComputersPrinting Methods Checking your Network Protocols Windows Windows 2000/XP Setup Windows Peer-to-peer PrintingRev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Windows 9x/ME Setup Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Management Advanced Port Options Windows SMB Printing Capture Settings Printing from MS-DOS ProgramsWindows with Server-based Print Queues Windows LPR Printing Choose Standard TCP/IP Port, then click New PortMacintosh AppleTalk AppleTalk SetupAdvanced Setup and Management PrintingLPR printing Setup Macintosh OSRequirements BiAdmin Management UtilityInstallation Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Printer Status IconsDevice Status Wizard ConfigurationUpgrade Menus Configuration System TabTCP/IP Tab AppleTalk Tab NetBEUI Tab Internet Printing Tab Logical Port Port TabPhysical Port NetWare Snmp Tab Web-Based Management PreparationServer Status Connecting to the Print ServerConfiguration Screens Configure Server AppleTalk NetBEUI TCP/IP ConnectionGeneral Remote Printer ModePrint Server Mode Rev YML657 Trap Receivers Snmp Simple Network Management ProtocolManagement Stations Logical Printers Internet Printing Internet Printing Protocol IPP Special FeaturesIPP Server Configuration Installing from the CD-ROM IPP Client Setup Windows 95/98/Me/NT 4.0/XPIPP Client Configuration Windows 95/98/ME/2000/XP/NT Installing using IPPCLIENT.EXEChanging the IPP Port Settings IPP Client Setup Windows 2000/XP Using IPP Printers Mail Server Internet Mail PrintingSystem Requirements Internet Print ServerInternet Mail Printing Configuration User SoftwareInstallation User Software Printing through the Internet Using the new PortChecking the Printer Driver Management Station Settings Configuring the Print Server for SnmpSnmp Settings Trap Receiving Station SettingsTroubleshooting FaxHardware & LAN Problems AppleTalk Macintosh Problem, perform the following steps Novell NetWare Windows Printing Problems Click OK to see the Print Port Configuration screen, as Rev YML657 NP3640 Fast Ethernet Mini Print Server User Guide Preparing for TCP/IP Printing Network Server ConfigurationWindows NT Server Adding a TCP/IP Remote PrinterEnter the appropriate logical printer number. e.g. L1 Novell NetWare Configuration Methods Bindery or NDSSetup Wizard Windows 2000 ServerOther Method BiAdminConfiguration Data GeneralCreating an Ndps Manager Object Setup for Ndps NetWareOverview Creating an Ndps Printer Agent Load NdpsmUnix Systems Trademarks and NoticesRegistering your NetComm Product Warranty Registration Form Page Product Warranty Limitations of Warranty