Toshiba 27HL95 Setting the Hdmi audio mode, Setting the time and date, To set the time and date

Chapter 6: Setting up your TV

Setting the HDMI™ audio mode

To select the HDMI audio mode:

1.Press MENU and open the Setup menu.

2.Highlight HDMI Audio and press •.

3.Press z y to select the HDMI audio mode (Auto, Digital, or Analog) and press ENTER. (Auto is the recommended mode). See “Connecting an HDMI or a DVI device to the HDMI input” on page 19.

Setup

Installation		Auto
Sleep Timer		Digital
On/Off Timer		Analog
PC Settings
PC Audio	No
HDMI Audio	Auto
Gray Level	2
Navigate	Select RTN Back EXIT Exit

Setting the time and date

Note: If you already set up the TV Guide On Screen¨ system, the time and date were set automatically and you can skip this step.

To set the time and date:

1.Press MENU and open the Setup menu.

2.Highlight Installation and press ENTER. (A new set of Installation menu icons will appear on-screen, as shown in step 3 below.)

3.Open the Time And Date menu, highlight Start Setup, and press ENTER.

Time And Date

Start Setup

Navigate Select RTN Back EXIT Exit

If you have not set up the TV Guide On Screen® system, the following screen will appear. To set the time, highlight TV Guide On Screen® and press ENTER. The TV Guide On Screen® setup sequence will start, and the time and date will be set automatically.

Time And Date

Your TV Guide On Screen system can provide accurate

time and date information.

It is recommended you set up TV Guide On Screen

first and use it to obtain the time and date.

Manual TV Guide On Screen Cancel

If you have already set up the TV Guide On Screen® system, or if you have not set up the time, the time and date setting screen will appear, set the time and date manually.

Time And Date
Date (MM/DD/YY)
	0	6	/	3	0	/	0	5
Time (HH:MM)	1	1	:	1	1		AM

Cancel Done

Note:

¥If you highlight TV Guide On Screen¨ (above) to set the time and date through the TV Guide On Screen¨ system and a power outage occurs, the time and date will be updated automatically when the power is restored.

¥If you highlight Manual (above) to set the time and date manually and a power outage occurs, you will lose the time and date settings when the power is restored.

¥If you manually set the time and date and then perform TV Guide On Screen¨ setup, the manual time and date settings will be overridden by the TV Guide On Screen¨ settings.

		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.	39
#01E_038-041_27HL95	39	05.9.12, 15:38
	Black

(E) 27HL95 *Web 213 : 276