Toshiba 27HL95 Connecting a personal computer PC, Signal names for mini D-sub 15 pin connector

Chapter 2: Connecting your TV

Connecting a personal computer (PC)

This connection allows you to view the image of a personal computer (PC) on the TV screen. When connecting a PC to the TV, use an analog RGB (15-pin) computer cable and a PC audio cable.

–To use a PC, set the monitor output resolution on the PC before connecting it to the TV. The following signals can be displayed.

•VGA: 640 × 480 @ 60Hz

•SVGA: 800 × 600 @ 60Hz

•XGA: 1024 × 768 @ 60Hz

Other formats or non-standard signals may not be displayed correctly.

–To display the optimum picture, use the PC setting feature. (see “Using the PC setting feature” on page 74).

Signal names for mini D-sub 15 pin connector

TV upper back panel

Computer

TV lower back panel

Audio cable

Audio output

Pin assignment for RGB/PC terminal

5	1
10	6
15	11
Pin No.	Signal name
1	R
2	G
3	B
4	NC (not connected)
5	NC
6	Ground
7	Ground
8	Ground
9	NC
10	Ground
11	NC
12	NC
13	H-sync
14	V-sync
15	NC

Conversion adapter

(if necessary)

Note:

¥Some PC models cannot be connected to this TV.

¥An adapter is not needed for computers with a DOS/V compatible mini D-sub 15-pin terminal.

¥Depending on the DVDÕs title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes.

22		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
#01E_012-022_27HL95	22	05.9.12, 15:34
	Black

(E) 27HL95 *Web 213 : 276