Toshiba 27HL95 manual Adjusting the back lighting feature Using dynamic contrast

Chapter 8: Using the TV’s features

Adjusting the picture (continued)

Adjusting the back lighting feature	Using dynamic contrast
You can use the back lighting feature to adjust the screen	When dynamic contrast is set to “On,” the TV will detect
brightness for improved picture clarity.	changes in the picture quality that affect the appearance of your
To adjust the back lighting:	contrast settings and then automatically adjust the video.

1. Press MENU and open the Video menu.

2. Highlight Advanced Picture Settings and press ENTER.

When dynamic contrast is set to “Off,” the settings selected in

the Contrast field in Picture Settings will be used.

3. Press z to highlight Back Lighting, and then press x • to

To select dynamic contrast preferences:

adjust the screen brightness (0-100).

1. Press MENU and open the Video menu.

Advanced Picture Settings

ANT 1

2. Highlight Advanced Picture Settings and press ENTER.

Dynamic Contrast

On

MPEG Noise Reduction

Off

CableClear

Auto

Color Temperature

Cool

Back Lighting

100

Video

Picture Settings

Reset

Done

Advanced Picture Settings

Theater Settings

4. To save the new settings, highlight Done and press

3. Press z to highlight the Dynamic Contrast field, and then

ENTER. To revert to the factory defaults, highlight Reset

and press ENTER.

press x• to make a selection (On or Off ).

Using MPEG noise reduction

Advanced Picture Settings

ANT 1

Dynamic Contrast

On

MPEG Noise Reduction

Off

The MPEG noise reduction feature allows you to reduce visible

CableClear

Auto

interference caused by MPEG compression. Choices for MPEG

Color Temperature

Cool

Back Lighting

100

noise reduction are High, Medium, Low and Off. Off is

Reset

Done

automatically selected when this feature is disabled (“grayed

out”). This feature is not available in the PC input mode.

4. To save the new settings, highlight Done and press

To select the MPEG noise reduction level:

ENTER. To revert to the factory defaults, highlight Reset

1. Press MENU and open the Video menu.

and press ENTER.

2. Highlight Advanced Picture Settings and press ENTER.

Note:

If you select one of the factory-set picture modes (Sports,

Standard, or Movie) and then set the dynamic contrast to ÒOn,Ó

the picture mode automatically changes to Preference in the

Video

Picture Settings menu.

Picture Settings

Advanced Picture Settings

Theater Settings

3.Press z to highlight the MPEG Noise Reduction field, and then press x• to make a selection.

Advanced Picture Settings					ANT 1
	Dynamic Contrast			On
	MPEG Noise Reduction			Off
	CableClear			Auto
	Color Temperature			Cool
	Back Lighting		100
		Reset		Done

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.	67
#01E_065-072_27HL95	67	05.9.12, 15:44
	Black

(E) 27HL95 *Web 213 : 276