Toshiba 27HL95 manual To view premium Cable channels, To view the DVD player, To view VCR

Chapter 2: Connecting your TV

Connecting a DVD player with S-video, a VCR, and a Cable box

You will need:

￿one signal splitter

￿five coaxial cables

￿two sets of standard A/V cables

Note: If you have a mono VCR, connect L/MONO on the TV (VIDEO 1) to your VCRÕs audio out terminal using the white audio cable only.

￿one S-video cable

￿one pair of standard audio cables

Note:

¥If your DVD player does not have S-video, use a standard video cable instead. Do not connect an S-video cable and a standard video cable to VIDEO 1 at the same time or the picture performance will be unacceptable.

¥If your DVD player has component video, see page 17.

¥Do not connect the DVD player and VCR to the same set of A/V inputs on the TV. (See the illustration, which shows the VCR connected to VIDEO 2 on the TV, and the DVD player connected to VIDEO 1.)

￿To view basic channels and access the TVÕs features:

Select the ANT 1 video input source.* Use the TV controls to change channels and access the TV’s features.

￿To view premium Cable channels:

Turn OFF the VCR. Select the ANT 2 video input source on the TV.* Tune the TV to channel 3 or 4 (whichever channel is vacant in your area). Use the Cable box controls to change channels.

Note: When you use a Cable box, you may not be able to use the remote control to program or access certain features on the TV.

￿To view the DVD player:

Turn ON the DVD player. Select the VIDEO 1 video input source on the TV.*

￿To view VCR:

Turn ON the VCR. Select the VIDEO 2 video input source on the TV.*

_____________

*To select the video input source, press INPUT on the remote control (see page 56). To program the TV remote control to operate other devices, see Chapter 3.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

From antenna or Cable TV

Signal splitter	IN	Cable box
OUT	OUT		IN	CH 3
				CH 4	OUT
			Stereo VCR
	VIDEO		AUDIO
		L	R		IN from ANT
CH 3			IN
CH 4
			OUT		OUT to TV
		L	R
TV lower		TV upper back panel
back panel

TV side panel

DVD player

with S-video		AUDIO
		OUT
		L
S-VIDEO	VIDEO	R
OUT	OUT

Note: The VIDEO/AUDIO OUT terminals output signals from the ANT 1, ANT 2, VIDEO 1, and VIDEO 2 terminals when the appropriate input mode is selected.

￿To enable the TV Guide On Screen¨ system to work with your cable box and to use the TV Guide On Screen¨ recording features:

1.Connect the G-LINK®cable according to the instructions on page 21.

2.Make sure the VCR is connected to the A/V OUT terminals on the TV (see illustration).

3.Set the VCR to the appropriate line input (refer to your VCR owner’s manual for details), and then turn OFF the VCR.

4.See Chapter 5 for details on setting up the TV Guide On Screen® system.

5.See Chapter 7 for details on using the TV Guide On Screen® system.

16		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
#01E_012-022_27HL95	16	05.9.12, 15:32
	Black

(E) 27HL95 *Web 213 : 276