To set a channel as Home using the remote control

Chapter 8: Using the TV’s features

Tuning channels (continued)

Using the Channel Browser™ (continued)

Adding and clearing channels in the

Setting a channel as the “Home” channel

channel history

for an input

Adding channels to the channel history

To set a channel as Home using the remote control:

The Channel Browser automatically creates a history of the

1. Tune the TV to the channel you would like to set as the

last 32 channels that were tuned in the current input (ANT 1,

Home channel for the current antenna input.

ANT 2, and Cable Box inputs only). A separate history will be

2. Press and hold the HOME (

) button on the remote

stored for each of these inputs.

control for 3 seconds. When the Home channel is saved,

If you change the input you are viewing:

the Channel Browser banner will appear at the bottom of

you will begin a channel history for that input if one did

the screen with the home icon flashing green.

Note: You can set a different Home channel for each input

not exist; or

you will return to the existing channel history for that input

(ANT 1, ANT 2, and Cable Box inputs only).

To set a channel as Home using the menus:

if one had already been started.

The Channel Browser will store the following channels:

1. Press MENU and open the Preferences menu.

•

All channels that are tuned using the numeric buttons on the

2. Highlight Home CH Setup and press ENTER. The Home

remote control.

CH Setup window will display.

•

All channels that are tuned for at least 7 seconds using the

Home CH Setup

CH yz buttons or the FAV yz buttons on the remote

ANT 1

- -

control.

ANT 2

- -

Cable Box

- -

Clearing channels from the channel history

Reset

Done

•Turning off the TV will clear all three channel histories

	(ANT 1, ANT 2, and Cable Box).	Note: "Cable Box" will appear in the Home CH Setup
	(ANT 1, ANT 2, and Cable Box).	window only if you connected a cable box to your TV.
		window only if you connected a cable box to your TV.

•Removing the CableCARD™ will clear the channel history

for the ANT 1 input.	3. Use the yz buttons to select the input for which you want
• Reconfiguring the ANT 1, ANT 2, or Cable Box input	to set the Home channel.
• Reconfiguring the ANT 1, ANT 2, or Cable Box input	4. Use the numeric and dash (–) buttons on the remote
will clear the channel history for the newly configured	4. Use the numeric and dash (–) buttons on the remote
input(s).	control to enter the desired Home channel for each input.
Note: See page 35 for details on configuring the antenna inputs.	5. To save your entries, highlight Done and press ENTER.
	To clear your entries, highlight Reset and press ENTER.
	To tune to the Home channel:
	While an input that has a set
	Home channel is active, press
	the HOME ( ) button on the
	remote control.
	Note: If you press the HOME	x/BACK
	button while an input other than	x/BACK
	an antenna or Cable Box input is	•/NEXT
	selected, the TV will tune to the	•/NEXT
	selected, the TV will tune to the
	most recently tuned Home
	channel and input.
		HOME ( )

		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.	59
			59
#01E_056-064_27HL95	59	05.9.12, 15:42
	Black

Toshiba 27HL95 To set a channel as Home using the remote control, To tune to the Home channel

Tuning channels (continued)

Using the Channel Browser™ (continued)

To set a channel as Home using the remote control:

To set a channel as Home using the menus:

(ANT 1, ANT 2, and Cable Box).

To tune to the Home channel:

most recently tuned Home

channel and input.

(E) 27HL95 *Web 213 : 276