Toshiba 27HL95 manual Point the remote control Directly at the device, DVD Menu

Chapter 3: Using the remote control

Using the remote control to operate a cable converter box, satellite receiver, VCR, DVD player, or HTIB (home theater in a box)

If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so). See pages 24 and 25.

To use your TV remote control to operate a:

•Cable converter box or satellite receiver, set the Device Switch to CBL/SAT.

•VCR, set the Device Switch to VCR.

•DVD player or HTIB, set the Device Switch to DVD.

Point the remote control

directly at the device.

Note:

Even after the TV remote control is programmed, it may not operate certain features on your other device. If this happens and you wish to use those features, you will need to use the deviceÕs original remote control.

+10 Press to directly access DVD chapters higher than 10.

DVD MENU

Accesses DVD menus.

ENTER Required by some VCRs and cable converter boxes to change the channel.

CLEAR Press to reset the title and chapter number.

Device Switch Set to “TV” to control the TV; “CBL/SAT” to control a cable converter box or satellite receiver; “VCR” to control a VCR; “DVD” to control a DVD player or HTIB.

REW Rewinds the tape or DVD. (Press during play mode to view the picture moving rapidly backward.)

TV/VCR To view one program while recording another, press to select TV mode.

SKIP Skips back to beginning of current DVD chapter or locates previous chapters.

REC Starts tape recording.

SKIP

Skips forward to locate later DVD chapters.

POWER

Turns the selected device on and off.

Channel Numbers (0-9)

Press to directly access channels (as opposed to CH y z).

TOP MENU

Accesses a DVD’s top menu.

y z x •

Press to navigate DVD menus (may not work on some DVD players).

TV GUIDE

Opens the TV Guide On Screen®.

CH y z

yselects the next higher channel; z selects the next lower channel. (for channels programmed into memory only)

FF

Fast-forwards the tape or DVD. (Press during play mode to view the picture moving rapidly forward.)

PLAY

Begins playback of a tape or DVD.

STOP

Stops the tape or DVD.

PAUSE

Press during play or record mode to pause the picture; press again to restart.

26		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
#01E_023-028_27HL95	26	05.9.12, 15:34
	Black

(E) 27HL95 *Web 213 : 276