Toshiba 27HL95 Using CableClear /DNR digital noise reduction, Selecting the color temperature

Reset

Dynamic Contrast MPEG Noise Reduction CableClear

Color Temperature Back Lighting

Advanced Picture Settings

3. Press z to highlight the Color Temperature

field, and then press x• to select the (Cool, Medium, or Warm).

Theater Settings

Advanced PictureSetttings

Picture Settings

100

ANT 1

Chapter 8: Using the TV’s features

Adjusting the picture (continued)

Using CableClear® /DNR (digital noise reduction)

The CableClear® digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc.

To select CableClear/DNR preferences:

1.Press MENU and open the Video menu.

2.Highlight Advanced Picture Settings and press ENTER.

3.Press z to highlight the CableClear/DNR field, and then press x• to make a selection.

Video

Picture Settings

Advanced Picture Settings

Theater Settings

Advanced Picture Settings					ANT 1
	Dynamic Contrast			On
	MPEG Noise Reduction			Low
	CableClear			Auto
	Color Temperature			Cool
	Back Lighting		100
		Reset		Done

Note:

¥For the current inputs Antenna, Video 1,or Video 2, the menu will display the text ÒCableClear.Ó If the signal is analog, the available selections are Off, Low, Middle, High, and Auto. If the signal is digital, the menu will display the text ÒCableClearÓ and will be Ògrayed outÓ with ÒOffÓ selected.

¥For the current inputs ColorStream HD or HDMI, the menu will display the text ÒDNR.Ó If the video resolution is 480i, the available selections are Off, Low, Middle, High, and Auto. If the video resolution is 1080i, the available selections are Off, Low, and High. If the video resolution is anything other than 480i or 1080i, the menu will display the text ÒDNRÓ and will be Ògrayed outÓ with ÒOffÓ selected.

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

Selecting the color temperature

You can change the quality of the picture by selecting from three preset color temperatures (cool, medium, and warm), as described below.

Mode Picture Quality

Cool blueish

Medium neutral

Warm reddish

To select the color temperature:

1.	Press MENU and open the Video menu.
2.	Highlight Advanced
	Picture Settings and
	press ENTER.	Video

mode you prefer

On

Low

Auto

Cool

Done

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

Note:

If you select one of the factory-set picture modes (Sports, Standard, or Movie) and then change the color temperature mode, the picture mode automatically changes to Preference in the Picture Settings menu.

66		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
#01E_065-072_27HL95	66	05.9.12, 15:44
	Black

(E) 27HL95 *Web 213 : 276