Toshiba 50HP82 Wide Operations, Watching with a wide screen manual, When watching VCR’s or DVD

Page 18

WIDE Operations

Watching with a wide screen (manual)

With this function, you can select one of four screen sizes.

When watching VCR’s or DVD

1.Press the WIDE button on the remote controller.

2.Within 3 seconds ...

Press the WIDE button again.

The screen size switches as follows:

→ ZOOM → NORMAL → FULL → JUST

ZOOM size screen

The picture is expanded in the horizontal and vertical direction, maintaining the original proportions.

• Use this for theater size (wide) movies, etc.

NORMAL size screen (4:3)

The normal size screen is displayed.

•The picture has the same size as video pictures with a 4:3 aspect ratio.

FULL size screen

The image is expanded in the horizontal direction.

•Images compressed in the horizontal direction (“squeezed images”) are expanded in the horizontal direction and displayed on the entire screen. (Normal images are expanded in the horizontal direction.)

JUST size screen

The picture is expanded in the horizontal and vertical directions at different ratios.

•Use this for watching normal video programs (4:3) with a wide screen.

When watching high definition video source

1. Press the WIDE button on the remote controller.

FULL size screen (16:9)

The full size screen is displayed.

• The picture has the same size as video pictures (16:9).

18

Image 18

Contents 50HP82 Precautions Important InformationTo avoid damage and prolong operating life Recommendations to avoid or minimize phosphor burn-inContents How to Attach Options to the Plasma Display Ventilation Requirements for enclosure mountingIntroduction Features you’ll enjoy includeContents of the Package Introduction to the 50HP82 Plasma DisplayPart Names and Function Front ViewVIDEO1, 2 Rear View/ Terminal BoardEXT Speaker L and R DVD1 / HD1Remote Controller Battery Installation and Replacement 8Remote control signal transmitter9Remote Jack Operating Range Using the wired remote control modeHandling the remote controller ApproxInstallation Personal computer with a digital RGB outputConnecting Your DVD Player Connecting Your PCConnecting Your VCR Connections with Equipment that has a Digital InterfaceExternal Speaker Connections Right LeftPin Assignments and Signal Levels for 15-pin RGB Analog Pin No Signal AnalogBasic Operations To check the remaining time To set the off timerTo cancel the off timer → 30 → 60 → 90 → 120 →Wide Operations When watching VCR’s or DVDWhen watching high definition video source Watching with a wide screen manual Picture Size setting When Picture Size is set to OFF Supported resolution Watching computer images with a wide screenShowing two pictures on the screen at the same time Operations in the Side-by-side modeMulti Window Operations Side-by-sideAdjusting the OSD controls Operations in the Picture-in-picture modeSelecting the input signals to be displayed To change the size of the sub screen, press the Zoom ButtonOSDOn Screen Display Controls Menu OperationsMain menu Sub menu Functions Picture adjustment screen Picture Settings MenuAdjusting the picture Adjusting the computer imageExample Setting the Theater mode To set to Theater Types of picture modes Once the setting is completed Setting the color temperatureExample Setting 1 See chart at right Setting the color temperatureAdjust the white balance using the and buttons Adjusting the color to the desired qualityExample Adjusting the White Balance Adjusting the white balance NR Example Setting NR-3Reducing noise in the picture Types of noise reductionExample Adjusting the bass Sound Settings MenuAdjusting the treble, bass and left/right balance Sound settings menuExample Adjusting the vertical position in the normal mode Screen Settings MenuAdjusting the Position, Size, Fine Picture, Picture Adj When Auto Picture is OFF Adjusting the Auto Picture Function Settings MenuSetting the on-screen display Adjusting the position of the imageTo adjust the position Adjusting the position of the menu displayExample Adjusting the position of the menu display Adjusting the position of the menu display Power management function Setting the power management for computer imagesExample Turning the power management function on Power management settingsGreen POWER/STANDBY indicatorDescription Turning the picture back on Horizontal and vertical synchronizing Picture already onExample Adjusting the Gray Level Setting the picture to suit the movieSetting the gray level for the sides of the screen Example Setting the Cinema Mode to OFF When you adjust the RGB3 ADJ Setting RGB3 ADJExample Setting Example Setting PLE to LockSetting the time for Inverse Perform Steps 1-2 on Page 36, thenSetting the time for Screen Wiper Setting the time To select on for the Working Time Resetting to the default values Set the length of time until the Screen Wiper mode starts To select on for Working Time Setting the BNC connectors Options Settings MenuSetting the allocation of the audio connectors Example Setting Audio 1 to VideoTo set the RGB select mode to Motion Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion See page 45 for the details of the above settingsSetting high definition images to the suitable screen size Setting the picture size for RGB input signals HD Select modes Language settings Setting the language for the menusExample Setting the menu display to Deutsch Information Menu Video signal formats Setting the video signal formatExample Setting the video signal format to 3.58 Ntsc To select 3.58 NtscComputer input signals supported by this system Table of Signals SupportedSupported resolution FrequencyPage Troubleshooting Symptom Checks RemedySpecifications FCC Statement MODEL50HP82 Your Responsibility How to Obtain Warranty ServicesCommercial Units For additional information, visit TACP’s web siteLimited One 1 Year Warranty on Parts and Labor For additional information, visit TCL’s web site02-06 7S800701