Toshiba 50HP82 owner manual Function Settings Menu, Setting the on-screen display, OSD modes

Page 31

Information

Adjusting the Auto Picture

ON	The Picture ADJ and Fine Picture
	adjustments are made automatically.
OFF	The Picture ADJ and Fine Picture
	adjustments are made manually.

Adjusting the position of the image

V-POSITION ...Adjusts the vertical position of the image.

H-POSITION ... Adjusts the horizontal position of the image.

V-HEIGHT .......Adjusts the vertical size of the image.

(Except for JUST mode)

H-WIDTH ......... Adjusts the horizontal size of the

image. (Except for JUST mode)

FINE PICTURE* .. Adjusts for flickering.

PICTURE ADJ* ... Adjusts for striped patterns on the image.

*The Picture ADJ and Fine Picture features are available only when the “Auto Picture” is off. The Auto Picture, Fine Picture and Picture ADJ features are available only for RGB signals.

Restoring the factory default settings

Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults except for Auto Picture.

Function Settings Menu

Setting the on-screen display

When using the display for presentations, etc., the display can be set so that the input source, screen mode, etc., do not appear.

Example: Turning the on-screen display mode off

Press the PROCEED button on the remote controller to

display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “FUNCTION,” then press the PROCEED button.

The “FUNCTION” screen appears.

2.Use the ▲ and ▼ buttons to select “OSD.”

F U N C T I O N

OSD		:	ON
OSD ADJ.		:	1
POWER MGT		:	OFF
GRAY LEVEL		:	3
CINEMA MODE		:	ON
RGB3 ADJ.		:	1

LONG LIFE
RESET
SEL.	ADJ. EXIT RETURN

3.To turn the on-screen display mode off ...

Use the and buttons to select “OFF.”

The mode switches as follows each time the or button is pressed:

ON ↔ OFF

F U N C T I O N

OSD		:	OFF
OSD ADJ.		:	1
POWER MGT		:	OFF
GRAY LEVEL		:	3
CINEMA MODE		:	ON
RGB3 ADJ.		:	1

LONG LIFE
RESET
SEL.	ADJ. EXIT RETURN

4.Once the setting is completed ...

Press the EXIT button to return to the main menu.

To close the main menu, press the EXIT button once more.

Information

OSD modes

ON	The on-screen display appears.
OFF	The on-screen display does not appear.

Restoring the factory default settings

Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.

31

Image 31

Contents 50HP82 Important Information PrecautionsRecommendations to avoid or minimize phosphor burn-in To avoid damage and prolong operating lifeContents Ventilation Requirements for enclosure mounting How to Attach Options to the Plasma DisplayIntroduction to the 50HP82 Plasma Display Features you’ll enjoy includeContents of the Package IntroductionFront View Part Names and FunctionDVD1 / HD1 Rear View/ Terminal BoardEXT Speaker L and R VIDEO1, 2Remote Controller 8Remote control signal transmitter Battery Installation and Replacement9Remote Jack Approx Using the wired remote control modeHandling the remote controller Operating RangePersonal computer with a digital RGB output InstallationConnections with Equipment that has a Digital Interface Connecting Your PCConnecting Your VCR Connecting Your DVD PlayerRight Left External Speaker ConnectionsPin No Signal Analog Pin Assignments and Signal Levels for 15-pin RGB AnalogBasic Operations → 30 → 60 → 90 → 120 → To set the off timerTo cancel the off timer To check the remaining timeWatching with a wide screen manual When watching VCR’s or DVDWhen watching high definition video source Wide OperationsWatching computer images with a wide screen When Picture Size is set to OFF Supported resolution Picture Size settingSide-by-side Operations in the Side-by-side modeMulti Window Operations Showing two pictures on the screen at the same timeTo change the size of the sub screen, press the Zoom Button Operations in the Picture-in-picture modeSelecting the input signals to be displayed Adjusting the OSD controlsMenu Operations OSDOn Screen Display ControlsMain menu Sub menu Functions Adjusting the computer image Picture Settings MenuAdjusting the picture Picture adjustment screenTo set to Theater Example Setting the Theater mode Types of picture modes Setting the color temperature Setting the color temperatureExample Setting 1 See chart at right Once the setting is completed Adjusting the white balance Adjusting the color to the desired qualityExample Adjusting the White Balance Adjust the white balance using the and buttons Types of noise reduction Example Setting NR-3 Reducing noise in the picture NR Sound settings menu Sound Settings MenuAdjusting the treble, bass and left/right balance Example Adjusting the bass When Auto Picture is OFF Screen Settings MenuAdjusting the Position, Size, Fine Picture, Picture Adj Example Adjusting the vertical position in the normal mode Adjusting the position of the image Function Settings MenuSetting the on-screen display Adjusting the Auto Picture Adjusting the position of the menu display Adjusting the position of the menu displayExample Adjusting the position of the menu display To adjust the position Power management settings Setting the power management for computer imagesExample Turning the power management function on Power management functionHorizontal and vertical synchronizing Picture already on POWER/STANDBY indicatorDescription Turning the picture back on GreenExample Setting the Cinema Mode to OFF Setting the picture to suit the movieSetting the gray level for the sides of the screen Example Adjusting the Gray LevelExample Setting PLE to Lock Setting RGB3 ADJExample Setting When you adjust the RGB3 ADJPerform Steps 1-2 on Page 36, then Setting the time for Inverse Setting the time Setting the time for Screen Wiper To select on for the Working Time Set the length of time until the Screen Wiper mode starts Resetting to the default values To select on for Working Time Example Setting Audio 1 to Video Options Settings MenuSetting the allocation of the audio connectors Setting the BNC connectorsSee page 45 for the details of the above settings Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion To set the RGB select mode to MotionSetting the picture size for RGB input signals Setting high definition images to the suitable screen size HD Select modes Information Menu Setting the language for the menusExample Setting the menu display to Deutsch Language settingsTo select 3.58 Ntsc Setting the video signal formatExample Setting the video signal format to 3.58 Ntsc Video signal formatsFrequency Table of Signals SupportedSupported resolution Computer input signals supported by this systemPage Symptom Checks Remedy TroubleshootingSpecifications FCC Statement MODEL50HP82 For additional information, visit TACP’s web site How to Obtain Warranty ServicesCommercial Units Your ResponsibilityFor additional information, visit TCL’s web site Limited One 1 Year Warranty on Parts and Labor02-06 7S800701