Setting the video signal format
Use these operations to set the video signal format.
Example: Setting the video signal format to “3.58 NTSC”
Press the PROCEED button on the remote controller to
display the MAIN MENU on the screen, then...
1.Use the ▲ and ▼ buttons to select “INFORMATION,” then press the PROCEED button.
The “INFORMATION” screen appears.
2.Use the ▲ and ▼ buttons to select “COLOR SYSTEM,” then press the PROCEED button.
I N F O R M AT I O N
FREQUENCY
LANGUAGE
COLOR SYSTEM
SEL. PROCEED OK EXIT RETURN
The “COLOR SYSTEM” screen appears.
C O L O R S Y S T E M
COLOR SYSTEM
:
AUTO1
ADJ. EXIT RETURN
3.To select “3.58 NTSC” ...
Use the and buttons to select “3.58 NTSC.”
The mode switches as follows when the and buttons are pressed:
→ |
| AUTO1 ↔ | AUTO2 ↔ | 3.58NTSC ↔ 4.43NTSC ← |
→ |
| SECAM ↔ | ||
|
| |||
|
|
|
|
|
C O L O R S Y S T E M
COLOR SYSTEM
:
3.58NTSC
ADJ. EXIT RETURN
4.Once the setting is completed ...
Press the EXIT button to return to the main menu. To close the main menu, press the EXIT button once more.
The color system is set to “3.58 NTSC.”
Information
Video signal formats
Different countries use different formats for video signals. Set to the format used in your country. AUTO1/2 ......... The video signals are automatically
detected and the format is set accordingly.
AUTO1: 3.58NTSC, 4.43NTSC, PAL, SECAM, PAL60
AUTO2:
PAL (B, G) ....... This is the standard format used
mainly in the United Kingdom and Germany.
SECAM ............. This is the standard format used
mainly in France and Russia.
4.43 NTSC,
PAL60 .............. This format is used for videos in
countries using PAL and SECAM video signals.
3.58NTSC ...... This is the standard format used mainly in Japan and the United States.
mainly in Brazil.
mainly in Argentina.
44