Toshiba 50HP82 owner manual Setting the time for Inverse, Perform Steps 1-2 on Page 36, then

Page 37

5.Once the setting is completed...

Press the EXIT button to return to the FUNCTION menu.

To close the main menu, press the EXIT button twice.

Information

PLE

AUTO .............. The brightness of the screen is

adjusted automatically to suit the picture quality.

LOCK .............. The brightness level is set to

minimum.

ORBITER

OFF	Orbiter mode does not function.
ON	The picture moves around the screen
	intermittently.

INVERSE

OFF	Inverse mode does not function.
ON	The picture is displayed alternately
	between positive image and negative
	image.
	You can set the time by pressing the
	PROCEED button while “ON” is set.
WT	The entire screen turns white.
	You can set the time by pressing the
	PROCEED button while “ON” is set.

SCREEN WIPER

OFF	Screen wiper mode does not function.
ON	Repeatedly moves the white vertical
	bar from the left end of the screen to
	the right end at a constant speed.
	You can set the time by pressing the
	PROCEED button while “ON” is set.

Restoring the factory default settings

Select “RESET” from the function menu. Note that this also restores other settings to the factory defaults.

•Only the PLE and ORBITER can be adjusted when an RGB signal is connected.

Setting the time for “ INVERSE”

Set the “INVERSE” or “WHITE” display time and the “WAITING TIME.”

Example: Setting so that the INVERSE mode starts in 30 minutes and proceeds for one and a half hours.

Perform Steps 1-2 on Page 36, then...

3.Use the ▲ and ▼ buttons to select “INVERSE,” then use the and buttons to select “ON.”

L O N G L I F E

PLE			:	AUTO
ORBITER			:	OFF
INVERSE			:	ON

SCREEN WIPER			:	OFF

SEL. PROCEED OK EXIT RETURN

4. Press the PROCEED button.

The “INVERSE/WT” screen appears.

I N V E R S E / W T

WORKING TIME :ON

SEL.

ADJ.

EXIT

RETURN

5.Adjust the time using the and buttons and the ▲ and ▼ buttons.

The mode switches as follows each time the or button is pressed.

I N V E R S E / W T

WORKING TIME	:	1H
	:	30M
WAITING TIME	:	0H
	:	30M

SEL.

ADJ.

EXIT

RETURN

The 1st line of the “WORKING TIME”:

→ ON or 0H ↔ 1H ↔ 2H ↔ 3H ↔ ... ↔ 12H ←

•The “WORKING TIME” (minutes) and “WAITING TIME” cannot be set when the “WORKING TIME” is “ON.”

37

Image 37

Contents 50HP82 Important Information PrecautionsRecommendations to avoid or minimize phosphor burn-in To avoid damage and prolong operating lifeContents Ventilation Requirements for enclosure mounting How to Attach Options to the Plasma DisplayContents of the Package Features you’ll enjoy includeIntroduction Introduction to the 50HP82 Plasma DisplayFront View Part Names and FunctionEXT Speaker L and R Rear View/ Terminal BoardVIDEO1, 2 DVD1 / HD1Remote Controller 8Remote control signal transmitter Battery Installation and Replacement9Remote Jack Handling the remote controller Using the wired remote control modeOperating Range ApproxPersonal computer with a digital RGB output InstallationConnecting Your VCR Connecting Your PCConnecting Your DVD Player Connections with Equipment that has a Digital InterfaceRight Left External Speaker ConnectionsPin No Signal Analog Pin Assignments and Signal Levels for 15-pin RGB AnalogBasic Operations To cancel the off timer To set the off timerTo check the remaining time → 30 → 60 → 90 → 120 →When watching high definition video source When watching VCR’s or DVDWide Operations Watching with a wide screen manual Supported resolution When Picture Size is set to OFF Picture Size setting Watching computer images with a wide screenMulti Window Operations Operations in the Side-by-side modeShowing two pictures on the screen at the same time Side-by-sideSelecting the input signals to be displayed Operations in the Picture-in-picture modeAdjusting the OSD controls To change the size of the sub screen, press the Zoom ButtonMenu Operations OSDOn Screen Display ControlsMain menu Sub menu Functions Adjusting the picture Picture Settings Menu Picture adjustment screen Adjusting the computer imageTo set to Theater Example Setting the Theater mode Types of picture modes Example Setting 1 See chart at right Setting the color temperatureOnce the setting is completed Setting the color temperatureExample Adjusting the White Balance Adjusting the color to the desired qualityAdjust the white balance using the and buttons Adjusting the white balanceReducing noise in the picture Example Setting NR-3 NR Types of noise reductionAdjusting the treble, bass and left/right balance Sound Settings MenuExample Adjusting the bass Sound settings menuAdjusting the Position, Size, Fine Picture, Picture Adj Screen Settings MenuExample Adjusting the vertical position in the normal mode When Auto Picture is OFFSetting the on-screen display Function Settings Menu Adjusting the Auto Picture Adjusting the position of the imageExample Adjusting the position of the menu display Adjusting the position of the menu displayTo adjust the position Adjusting the position of the menu displayExample Turning the power management function on Setting the power management for computer images Power management function Power management settingsDescription Turning the picture back on POWER/STANDBY indicatorGreen Horizontal and vertical synchronizing Picture already onSetting the gray level for the sides of the screen Setting the picture to suit the movieExample Adjusting the Gray Level Example Setting the Cinema Mode to OFFExample Setting Setting RGB3 ADJ When you adjust the RGB3 ADJ Example Setting PLE to LockPerform Steps 1-2 on Page 36, then Setting the time for Inverse Setting the time Setting the time for Screen Wiper To select on for the Working Time Set the length of time until the Screen Wiper mode starts Resetting to the default values To select on for Working Time Setting the allocation of the audio connectors Options Settings MenuSetting the BNC connectors Example Setting Audio 1 to VideoExample Setting the RGB Select mode to Motion Setting a computer image to the correct RGB select screenTo set the RGB select mode to Motion See page 45 for the details of the above settingsSetting the picture size for RGB input signals Setting high definition images to the suitable screen size HD Select modes Example Setting the menu display to Deutsch Setting the language for the menus Language settings Information MenuExample Setting the video signal format to 3.58 Ntsc Setting the video signal format Video signal formats To select 3.58 NtscSupported resolution Table of Signals SupportedComputer input signals supported by this system FrequencyPage Symptom Checks Remedy TroubleshootingSpecifications FCC Statement MODEL50HP82 Commercial Units How to Obtain Warranty ServicesYour Responsibility For additional information, visit TACP’s web siteFor additional information, visit TCL’s web site Limited One 1 Year Warranty on Parts and Labor02-06 7S800701