Toshiba 50HP82 owner manual Resetting to the default values,  To select on for Working Time

Page 39

The 2nd line of the “WORKING TIME”:

0M 3M 6M 9M ... 57M

The 1st line of the “WAITING TIME”:

0H 1H 2H 3H ... 12H

The 2nd line of the “WAITING TIME”:

0M 3M 6M 9M ... 57M

“SPEED”:

12 3 4 5

6.Once the setting is completed...

Press the EXIT button several times to return to the main menu.

To close the main menu, press the EXIT button once more.

Information

Setting the time

WORKING TIME

Set the length of time the “SCREEN WIPER” mode lasts.

When the WORKING TIME is set to “ON,” the “SCREEN WIPER” mode stays in the last mode.

WAITING TIME

Set the length of time until the “SCREEN WIPER” mode starts.

SPEED

Set the moving speed for the “SCREEN WIPER”. The speed decreases as the number increases.

The “WORKING TIME” and “WAITING TIME” can be set for up to 12 hours and 45 minutes in units of 3 minutes.

To select “ ON” for “ WORKING TIME” ...

Set the hours of the “WORKING TIME” to 0H and the minutes to 0M. “ON” will be displayed.

Resetting to the default values

Use these operations to restore all the picture adjustments, audio settings, to the factory default values.

Refer to page 23 for items to be reset.

Press the PROCEED button on the remote controller to

display the MAIN MENU on the screen, then...

1.Use the and buttons to select “FUNCTION,” then press the PROCEED button.

The “FUNCTION” screen appears.

2.Use the and buttons to select “RESET,” then press the PROCEED button.

F U N C T I O N

OSD

:

ON

OSD ADJ.

:

1

 

 

POWER MGT

:

OFF

GRAY LEVEL

:

3

 

 

CINEMA MODE

:

ON

RGB3 ADJ.

:

1

 

 

LONG LIFE

 

 

 

 

RESET

 

 

 

 

SEL.

 

OK

 

 

RETURN

PROCEED

 

EXIT

The “RESET” screen appears.

3.Use the and buttons to select “RESET,” then press the PROCEED button.

R E S E T

RESET

RETURN

PROCEED OK EXIT RETURN

R E S E T

S E T T I N G N OW

When the “SETTING NOW” screen disappears, the screen will be restored to the previous “RESET” mode, then all the settings are restored to the default values.

4.Once the setting is completed ...

Press the EXIT button.

To close the main menu, press the EXIT button once more.

39

Image 39
Contents 50HP82 Important Information PrecautionsRecommendations to avoid or minimize phosphor burn-in To avoid damage and prolong operating lifeContents Ventilation Requirements for enclosure mounting How to Attach Options to the Plasma DisplayIntroduction to the 50HP82 Plasma Display Features you’ll enjoy includeContents of the Package IntroductionFront View Part Names and FunctionDVD1 / HD1 Rear View/ Terminal BoardEXT Speaker L and R VIDEO1, 2Remote Controller Battery Installation and Replacement 8Remote control signal transmitter9Remote Jack Approx Using the wired remote control modeHandling the remote controller Operating RangePersonal computer with a digital RGB output InstallationConnections with Equipment that has a Digital Interface Connecting Your PCConnecting Your VCR Connecting Your DVD PlayerRight Left External Speaker ConnectionsPin No Signal Analog Pin Assignments and Signal Levels for 15-pin RGB AnalogBasic Operations → 30 → 60 → 90 → 120 → To set the off timerTo cancel the off timer To check the remaining timeWatching with a wide screen manual When watching VCR’s or DVDWhen watching high definition video source Wide OperationsWatching computer images with a wide screen When Picture Size is set to OFF Supported resolution  Picture Size settingSide-by-side Operations in the Side-by-side modeMulti Window Operations Showing two pictures on the screen at the same timeTo change the size of the sub screen, press the Zoom Button Operations in the Picture-in-picture modeSelecting the input signals to be displayed Adjusting the OSD controlsMenu Operations OSDOn Screen Display ControlsMain menu Sub menu Functions  Adjusting the computer image Picture Settings MenuAdjusting the picture  Picture adjustment screenExample Setting the Theater mode To set to Theater Types of picture modes  Setting the color temperature Setting the color temperatureExample Setting 1 See chart at right Once the setting is completed Adjusting the white balance Adjusting the color to the desired qualityExample Adjusting the White Balance Adjust the white balance using the  and  buttons Types of noise reduction Example Setting NR-3Reducing noise in the picture  NR Sound settings menu Sound Settings MenuAdjusting the treble, bass and left/right balance Example Adjusting the bass When Auto Picture is OFF Screen Settings MenuAdjusting the Position, Size, Fine Picture, Picture Adj Example Adjusting the vertical position in the normal mode Adjusting the position of the image Function Settings MenuSetting the on-screen display  Adjusting the Auto Picture Adjusting the position of the menu display Adjusting the position of the menu displayExample Adjusting the position of the menu display To adjust the position Power management settings Setting the power management for computer imagesExample Turning the power management function on  Power management functionHorizontal and vertical synchronizing Picture already on POWER/STANDBY indicatorDescription Turning the picture back on GreenExample Setting the Cinema Mode to OFF Setting the picture to suit the movieSetting the gray level for the sides of the screen Example Adjusting the Gray LevelExample Setting PLE to Lock Setting RGB3 ADJExample Setting  When you adjust the RGB3 ADJPerform Steps 1-2 on Page 36, then Setting the time for InverseSetting the time for Screen Wiper  Setting the time To select on for the Working Time Resetting to the default values Set the length of time until the Screen Wiper mode starts To select on for Working Time Example Setting Audio 1 to Video Options Settings MenuSetting the allocation of the audio connectors Setting the BNC connectorsSee page 45 for the details of the above settings Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion To set the RGB select mode to MotionSetting high definition images to the suitable screen size Setting the picture size for RGB input signals HD Select modes Information Menu Setting the language for the menusExample Setting the menu display to Deutsch  Language settingsTo select 3.58 Ntsc Setting the video signal formatExample Setting the video signal format to 3.58 Ntsc  Video signal formatsFrequency Table of Signals SupportedSupported resolution Computer input signals supported by this systemPage Symptom Checks Remedy TroubleshootingSpecifications FCC Statement MODEL50HP82 For additional information, visit TACP’s web site How to Obtain Warranty ServicesCommercial Units Your ResponsibilityFor additional information, visit TCL’s web site Limited One 1 Year Warranty on Parts and Labor02-06 7S800701