Toshiba 50HP82 Watching computer images with a wide screen, When Picture Size is set to OFF

Page 19

Watching computer images with a wide screen

Switch to the wide screen mode to expand the 4:3 image to fill the entire screen.

1.Press the WIDE button on the remote controller.

2.Within 3 seconds ...

Press the WIDE button again.

The screen size switches as follows:

→ NORMAL → FULL

NORMAL size screen (4:3 or SXGA 5:4)

The picture has the same size as the normal computer image.

FULL size screen

The image is expanded in the horizontal direction.

When wide signals are input.

FULL size screen

When “ PICTURE SIZE” is set to “ OFF”

The screen size switches as follows:

→TRUE → FULL

TRUE size screen (VGA, SVGA 4:3)

The image is true resolution.

FULL size screen

The image is expanded in the horizontal and vertical direction.

TRUE

The image is true resolution.

FULL

Information

Supported resolution

See page 45 for details on the display output of the various VESA signal standards supported by the display.

“ PICTURE SIZE” setting

When the setting of “PICTURE SIZE” is OFF, the size of RGB-input pictures will be TRUE in place of

NORMAL.

When 852 (848) dot 480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are in- put

Select an appropriate setting for RGB SELECT mode referring to the“Table of Signals Supported” on page 45.

*“ IBM PC/AT” and “VGA” are registered trademarks of IBM, Inc. of the United States.

19

Image 19

Contents 50HP82 Important Information PrecautionsRecommendations to avoid or minimize phosphor burn-in To avoid damage and prolong operating lifeContents Ventilation Requirements for enclosure mounting How to Attach Options to the Plasma DisplayIntroduction to the 50HP82 Plasma Display Features you’ll enjoy includeContents of the Package IntroductionFront View Part Names and FunctionDVD1 / HD1 Rear View/ Terminal BoardEXT Speaker L and R VIDEO1, 2Remote Controller 8Remote control signal transmitter Battery Installation and Replacement9Remote Jack Approx Using the wired remote control modeHandling the remote controller Operating RangePersonal computer with a digital RGB output InstallationConnections with Equipment that has a Digital Interface Connecting Your PCConnecting Your VCR Connecting Your DVD PlayerRight Left External Speaker ConnectionsPin No Signal Analog Pin Assignments and Signal Levels for 15-pin RGB AnalogBasic Operations → 30 → 60 → 90 → 120 → To set the off timerTo cancel the off timer To check the remaining timeWatching with a wide screen manual When watching VCR’s or DVDWhen watching high definition video source Wide OperationsWatching computer images with a wide screen When Picture Size is set to OFF Supported resolution Picture Size settingSide-by-side Operations in the Side-by-side modeMulti Window Operations Showing two pictures on the screen at the same timeTo change the size of the sub screen, press the Zoom Button Operations in the Picture-in-picture modeSelecting the input signals to be displayed Adjusting the OSD controlsMenu Operations OSDOn Screen Display ControlsMain menu Sub menu Functions Adjusting the computer image Picture Settings MenuAdjusting the picture Picture adjustment screenTo set to Theater Example Setting the Theater mode Types of picture modes Setting the color temperature Setting the color temperatureExample Setting 1 See chart at right Once the setting is completed Adjusting the white balance Adjusting the color to the desired qualityExample Adjusting the White Balance Adjust the white balance using the and buttons Types of noise reduction Example Setting NR-3Reducing noise in the picture NR Sound settings menu Sound Settings MenuAdjusting the treble, bass and left/right balance Example Adjusting the bass When Auto Picture is OFF Screen Settings MenuAdjusting the Position, Size, Fine Picture, Picture Adj Example Adjusting the vertical position in the normal mode Adjusting the position of the image Function Settings MenuSetting the on-screen display Adjusting the Auto Picture Adjusting the position of the menu display Adjusting the position of the menu displayExample Adjusting the position of the menu display To adjust the position Power management settings Setting the power management for computer imagesExample Turning the power management function on Power management functionHorizontal and vertical synchronizing Picture already on POWER/STANDBY indicatorDescription Turning the picture back on GreenExample Setting the Cinema Mode to OFF Setting the picture to suit the movieSetting the gray level for the sides of the screen Example Adjusting the Gray LevelExample Setting PLE to Lock Setting RGB3 ADJExample Setting When you adjust the RGB3 ADJPerform Steps 1-2 on Page 36, then Setting the time for Inverse Setting the time Setting the time for Screen Wiper To select on for the Working Time Set the length of time until the Screen Wiper mode starts Resetting to the default values To select on for Working Time Example Setting Audio 1 to Video Options Settings MenuSetting the allocation of the audio connectors Setting the BNC connectorsSee page 45 for the details of the above settings Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion To set the RGB select mode to MotionSetting the picture size for RGB input signals Setting high definition images to the suitable screen size HD Select modes Information Menu Setting the language for the menusExample Setting the menu display to Deutsch Language settingsTo select 3.58 Ntsc Setting the video signal formatExample Setting the video signal format to 3.58 Ntsc Video signal formatsFrequency Table of Signals SupportedSupported resolution Computer input signals supported by this systemPage Symptom Checks Remedy TroubleshootingSpecifications FCC Statement MODEL50HP82 For additional information, visit TACP’s web site How to Obtain Warranty ServicesCommercial Units Your ResponsibilityFor additional information, visit TCL’s web site Limited One 1 Year Warranty on Parts and Labor02-06 7S800701