Toshiba 50HP82 Screen Settings Menu, Adjusting the Position, Size, Fine Picture, Picture Adj

Screen Settings Menu

Adjusting the Position, Size, Fine Picture, Picture Adj

The position of the image can be adjusted and flickering of the image can be corrected.

Example: Adjusting the vertical position in the normal mode

Press the PROCEED button on the remote controller to

display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “SCREEN,” then press the PROCEED button. The “SCREEN” menu appears.

Default settings (when RGB/PC is selected)

S C R E E N

MODE :NORMAL

V–POSITION
H–POSITION
V–HEIGHT
H–WIDTH
AUTO PICTURE		: OFF
FINE PICTURE
PICTURE ADJ.
SEL.	ADJ.			RETURN
			EXIT

•The settings on the SCREEN menu are not preset at the factory.

To select a mode ...

Use the  and  buttons to select a mode.

The mode switches as follows when the  and  buttons are pressed:

→ NORMAL ↔ FULL ←

•The mode can also be switched by pressing the “WIDE” button on the remote controller.

2.To adjust the vertical position ...

Use the ▲ and ▼ buttons to select “V-POSITION”.

S C R E E N
MODE	: NORMAL
V–POSITION
H–POSITION
V–HEIGHT
H–WIDTH
AUTO PICTURE		: OFF
FINE PICTURE
PICTURE ADJ.
SEL.	ADJ.			RETURN
			EXIT

3. Adjust using the  and  buttons.

V– POSITION

•If neither the  or  button is pressed within 5 seconds, the current setting is set and the previous screen reappears.

To continue making other computer image

adjustments ...

Repeat from step 2.

4.Once all adjustments are completed ...

Press the EXIT button to return to the main menu.

To close the main menu, press the EXIT button once more.

Information

When “ AUTO PICTURE” is “ OFF”

	S C R E E N
MODE		: FULL
V–POSITION
H–POSITION
V–HEIGHT
H–WIDTH
AUTO PICTURE			: OFF
FINE PICTURE
PICTURE ADJ.
SEL.		ADJ.			RETURN
				EXIT

When Auto Picture is off, the Fine Picture and the Picture ADJ items are displayed so that you can adjust them.

30