Toshiba 20A42 manual Stereo and Second Audio Program SAP, Using the Lock Menu

USING THE LOCK MENU

The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER and CHANGE PASSWORD functions.

You can use these functions after entering the correct PASSWORD. (This password is the same one selected under "SETTING V-CHIP".)

LOCKING CHANNELS

With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels.

1

2

3

4

5

Use the Channel Number Buttons (0-9)	LOCK
to display the television channel you wish	CH LOCK
to lock.	VIDEO LOCK
	GAME TIMER
	CHANGE PASSWORD

Press MENU, then press SET + or – until

the indicator next to "LOCK" begins to	〈 + / – / ENTER / MENU 〉
flash. Then press ENTER.

Use the Channel Number buttons (0-9) to enter your password, then press ENTER.

The LOCK menu appears.

Press SET + or – until the indicator next to "CH LOCK" begins to flash, then press ENTER.

Press SET + or – to select:		CH LOCK
• INPUT to select the channel as one to		CABLE
be locked. Then press ENTER.		INPUT ---	---	---
• ALL CLEAR to clear all channels from	---		---	---
	---		---	---

the list of locked channels. Then press	ALL CLEAR
ENTER	〈 + / – / ENTER / MENU 〉

6 Repeat steps 1 through 5 to lock other channels. When you are finished locking channels, press MENU repeatedly until the MENU screen is cleared.

If you try to tune a locked channel, the TV will not display it, but will display the nearest unblocked channel.

NOTES:

•If you are accessing the LOCK menus or V-chip menus for the first time, choose a four-digit number to be your password.

•After programming CH LOCK, change channels before turning off the television.

•If you want to unlock channels, select ALL CLEAR on step 5, then press ENTER.

LOCKING VIDEO INPUT

With the VIDEO LOCK feature, you can lock out the input source (VIDEO) and channel 3 and 4.

You will not be able to select the input sources with the TV/ VIDEO button or Channel buttons unless you clear the setting.

1	Press MENU, then press SET + or –	VIDEO LOCK
	until the indicator next to "LOCK" begins	OFF
	to flash, then press ENTER.	VIDEO
		VIDEO+
2	Use the Channel Number buttons (0-9) to
	enter your password, then press ENTER.	〈 + / – / ENTER / MENU 〉
	The LOCK menu appears.
3	Press SET + or – until the indicator next to "VIDEO LOCK"
	begins to flash, then press ENTER.
	Press SET + or – to select:
4
	• OFF: Unlocks all video input sources.
	• VIDEO: Locks VIDEO.
	• VIDEO +: Locks VIDEO, channel 3 and channel 4.
	This option should be used if you use the antenna
	to play a video tape.
5	Press MENU to return to normal viewing.

SETTING THE GAME TIMER

With the GAME TIMER feature, you can automatically activate the VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a TV game (30, 60, or 90 minutes).

1	Press MENU, then press SET + or – until	GAME TIMER
	the indicator next to "LOCK" begins
		OFF
	to flash, then press ENTER.	30
		60
2	Use the Channel Number buttons (0-9)	90
	to enter your password, then press ENTER.	〈 + / – / ENTER / MENU 〉
	The LOCK menu appears.
3	Press SET + or – until the indicator next to "GAME
	TIMER" begins to flash, then press ENTER.
4	Press SET + or – to select a time limit (30 minutes, 60 minutes,
	90 minutes or OFF).
5	Press MENU repeatedly until the MENU screen is cleared.
	After the GAME TIMER is programmed, the display will appear
	briefly every ten minutes to remind you that the GAME TIMER
	is operating. When the programmed end time is reached, the
	display will change the last channel automatically.

STEREO AND SECOND AUDIO PROGRAM (SAP)

The TV is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes.

LISTENING TO SAP (SECOND AUDIO PROGRAM)

When the TV is turned on or a channel selection is made, the letters “SAP” appear on the screen when Second Audio Program broadcasting is received.

TO SELECT DESIRED SOUND

Press MTS to select the desired sound.

LISTENING TO STEREO SOUND

When the TV is turned on or a channel selection is made, the word “STEREO” appears on the screen. This means that "Stereo" broadcasting is received. When enjoy stereo sound from the left and right speakers.

•When "Mono" broadcasting is received, no indication is displayed.

•If the broadcast signal is not strong enough or clear stereo sound is not available, press MTS to change to mono sound. The noise should be eliminated. Press it again to return to stereo sound.

MONO+SAP BROADCASTING

MAIN SOUND	SAP SOUND	MAIN + SAP SOUND
(MONO)		(MONO)

STEREO+SAP BROADCASTING

MAIN SOUND	SAP SOUND
(STEREO)
MAIN SOUND	MAIN + SAP SOUND
(MONO)	(MONO)

11

3L70101A-E P.08-13 11 5/6/02, 11:34 AM