Pioneer DVH-P5900MP operation manual Setting the angle icon display, Setting the aspect ratio

Section

03 Operating this unit

Setting the angle icon display

You can set it up so that the angle icon ap- pears on scenes where the angle can be switched.

1Move the joystick up or down to select

ANGLE.

2Click the joystick.

3Move the joystick left or right to select on or off.

Each time you move the joystick left or right the selected setting switches on or off.

4Click the joystick.

Angle icon display is set on or off.

Note

Pressing RETURN takes you back to the previous display.

Setting the aspect ratio

There are two kinds of display. A wide screen display has a width-to-height ratio (TV aspect) of 16:9, while a regular display has a TV aspect of 4:3. Be sure to select the correct TV aspect for the display you use.

!When using a regular display, select either LETTER BOX or PANSCAN. Selecting 16:9 may result in an unnatural picture.

1Move the joystick up or down to select

TV ASPECT.

2Click the joystick.

TV aspect menu is displayed.

3Move the joystick left or right to select the desired TV aspect.

!16:9 – Wide screen picture (16:9) is dis- played as it is (initial setting)

!LETTER BOX – The picture is the shape of a letterbox with black bands at the top and bottom of the screen

!PANSCAN – The picture is cut short at the right and left of the screen

4 Click the joystick.

The selected TV aspect is set.

Notes

!When playing discs that do not specify PANSCAN, playback is with LETTER BOX even if you select PANSCAN setting. Confirm whether the disc package bears the 16 : 9 LB mark. (See page 7.)

!Some discs do not enable changing of the TV aspect. For details, refer to the disc’s instruc- tions.

!Pressing RETURN takes you back to the pre- vious display.

Setting the parental lock

Some DVD video discs let you use parental lock to restrict children from viewing violent and adult-oriented scenes. You can set the par- ental lock to your desired level.

!To perform this function, set the remote control to DVD mode.

!When you set a parental lock level and then play a disc featuring parental lock, code number input indications may be dis- played. In this case, playback will begin when the correct code number is input.

Setting the code number and level

You need to have registered a code number for playing back discs with parantal lock.

!We recommend to keep a record of your code number in case you forget it.

1Move the joystick up or down to select

PARENTAL.

48 En