Pioneer DVH-P5900MP operation manual Available accessories

		Section
Available accessories	04

3Turn the ignition switch to ON or ACC. If the car’s air conditioner or heater is turned on, turn it off. Noise from the fan in the air conditioner or heater may prevent correct auto

TA and EQ.

# Press SOURCE to turn the source on if this unit is turned off.

4Select the position for the seat on which the microphone is placed.

Refer to Using the position selector on page

# If no position is selected before you start auto TA and EQ, FRT-L is selected automatically.

5Press SOURCE and hold until the unit turns off.

6Press and hold EQ to enter the auto TA and EQ measurement mode.

7Plug the microphone into the micro- phone input jack on the multi-channel pro- cessor.

Available accessories

8Press ato start the auto TA and EQ.

9Get out of the car and close the door within 10 seconds when the 10-second count-down starts.

The measurement tone (noise) is outputted from the speakers, and auto TA and EQ be-

gins.

# When all speakers are connected, auto TA

and EQ is completed in about nine minutes.

# To stop auto TA and EQ, press any keys.

# To cancel auto TA and EQ part way through, press BAND.

10When auto TA and EQ is completed, COMPLETE is displayed.

When correct measurement of car interior acoustic characteristics is not possible, an error message is displayed. (Refer to Under- standing auto TA and EQ error messages on page 84.)

11Press BAND to cancel the auto TA and EQ mode.

En 75