Pioneer DVH-P5900MP operation manual Setting the speaker setting, Correcting the subwoofer’s phase

Page 76

Section

04 Available accessories

12Store the microphone carefully in the glove compartment.

Store the microphone carefully in the glove compartment or any other safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change or malfunction.

Setting the speaker setting

You need to make with/without (or yes/no) and size (bass reproducing capacity) selection/ad- justments depending on the installed speak- ers. The size needs to be set to LRG (large) if the speaker is capable of reproducing sounds of about 100 Hz or below. Otherwise select SML (small).

!Low frequency range is not output if the subwoofer is set to OFF and the front and rear speakers set to SML or OFF.

!It is imperative that non-installed speakers be set to OFF.

!Set the front or rear speaker to LRG if the speaker is capable of reproducing bass content, or if no subwoofer is installed.

1Press AUDIO and hold until AT EQ ap- pears in the display, then press AUDIO to select FRONT.

2Press cor dto select the speaker to be adjusted.

Each press of cor dselects the speaker in the following order:

FRONT (front speakers)—CENTER (center speaker)—REAR (rear speakers)—SUB.W

(subwoofer)—PHASE (subwoofer setting)

# You can switch to PHASE only when the sub- woofer has been set to ON.

3Press aor bto select the correct size for the selected speaker.

Each press of aor bselects the size in the fol- lowing order:

SML (small)—LRG (large)—OFF (off)

#You cannot select OFF, when FRONT (front speakers) have been selected.

#You can select ON or OFF, when SUB.W (sub- woofer) has been selected.

#You can switch REV (reverse phase) or NOR (normal phase), when PHASE (subwoofer setting) has been selected.

4Press BAND to return to the playback display.

Correcting the subwoofer’s phase

If trying to boost the bass output of the sub- woofer doesn’t do much or rather makes you feel that the bass gets more murky, this may indicate that the subwoofer’s output and bass content you hear over other speakers cancel each other out. To remove this problem, try changing the phase setting for the subwoofer.

1Press AUDIO and hold until AT EQ ap- pears in the display, then press AUDIO to select FRONT.

2Press cor dto select the subwoofer. Each press of cor dselects the speaker in the following order:

FRONT (front speakers)—CENTER (center speaker)—REAR (rear speakers)—SUB.W (subwoofer)—PHASE (subwoofer setting)

3Press ato turn the subwoofer output

on.

4Press dto select PHASE (subwoofer setting).

5Press aor bto select the subwoofer output phase.

Press ato select NOR (normal phase). Press bto select REV (reverse phase).

76 En

Image 76
Contents DVH-P5900MP Contents Initial SettingsPrecautions To ensure safe driving PrecautionsBefore You Start About this unitPlayable discs Class 1 Laser ProductAbout this manual Features Visit our websiteCase of trouble DVD video disc region numbersAbout WMA About MP3 About AACWhen an operation is prohibited What the marks on DVDs indicateProtecting your unit from theft About DivXUse and care of the remote control Installing the batteryRemoving the front panel Attaching the front panelUsing the remote control Before You StartOperating this unit What’s WhatHead unit  Remote control Operating this unitCM BACK/CM DVH mode operation Using the remote control operation mode switchDVD mode operation Power ON/OFF Operating this unit Basic OperationsSelecting a source Built-in DVD player basic operationsTuner Basic OperationsThis UnitIntroduction of advanced operations Storing and recalling broadcast frequenciesBand Tuning in strong signals Using PI SeekUsing Auto PI Seek for preset stations Storing the strongest broadcast frequenciesReceiving traffic announcements Switching the RDS displayLimiting stations to regional programming Receiving PTY alarm broadcasts Playing DVD video discsPTY list Watching a DVD videoPausing DVD video playback Selecting a chapter directlySpecifying title ClearFrame-by-frame playback Slow motion playbackChanging audio language during playback Multi-audio AudioChanging the viewing angle during playback Multi-angle AngleResume playback Bookmark Automatic playback of DVDsCM skip/CM back Return to the specified sceneRepeating play Selecting audio outputPausing DVD video playback Using compressionSelecting the play mode Selecting the title listSwitching the information and title display   Operating this unit Playing Video CDs Watching a Video CDBasic operation of Video CD Specifying trackPausing Video CD playback Selecting a track directlyTo return to the playback display, press Pausing playbackPBC playback control, this function can Ber indicator and play time indicator Switching the information display    Watching a DivX Operating this unit Playing DivX filesSelecting a file directly Playing DivX VOD content Pausing playbackAlso be selected by using the a/b/c/dbut Selecting files from the file name listOr folder names and select one of them to You can also use the function menu to disSelecting files from the file name list       Operating this unit Playing CDs Listening to a CDTo perform fast forward or reverse Press and hold cor d Mote controlDisplaying text information on disc Using disc title functionsEntering disc titles Selecting tracks from the track title list Selecting tracks from the file name listPlaying tracks in random order Selecting a repeat play rangeScanning folders and tracks Pausing disc playback Selecting tracks from the listSearching every 10 tracks in the current disc or folder Ing FunctionTitle, Folder folder name, File file Press Display to switch the informaName, Artist artist name Operating this unit Audio Adjustments Introduction of audio adjustmentsUsing balance adjustment Using the equalizerAdjusting 7-band graphic equalizer Adjusting equalizer curvesCurves, you can adjust the level of each band Adjusting loudness Using subwoofer outputAdjusting subwoofer settings Boosting the bassUsing the high pass filter Adjusting source levelsOperating this unit Setting up the DVD player Introduction of DVD setup adjustmentsSetting the subtitle language When you select OthersSetting the menu language Setting the audio languageSwitching the assist subtitle on or off Setting the angle icon display Setting the aspect ratioSetting the parental lock Setting the code number and levelUnit Changing the levelIf you forget your code number Setting the DivX subtitle file Setting for digital outputDisplaying your DivX VOD registration code Divx VODOperating this unit Initial Settings Adjusting initial settingsSetting the clock Setting the FM tuning stepSwitching Auto PI Seek Switching the warning toneSwitching the auxiliary setting Setting the AV inputSetting the rear output and subwoofer controller Switching the Ever ScrollSetting the TV signal Setting for rear view camera back up cameraCorrecting distorted sound Resetting the audio functionsPAL-SECAM Using the AUX source Setting the level indicatorOperating this unit Other Functions Switching between digital and analog Using the PGM buttonSetting the AUX title Sound mutingAvailable accessories Playing songs on iPod Tween the following settingsBrowsing for a song Be displayedAvailable accessories Displaying text information on iPodRepeating play Playing songs in a random order shufflePausing a song Playing songs on USB portable audio player/USB memoryYou can use this unit to control a USB adapter Provides information on USB portable audioDisplaying text information of an audio file Function and operationMulti-CD Player About the disc title list functions, pleaseFunction mode Function name OperationUsing ITS playlists AvailableCreating a playlist with ITS programming Playback from your ITS playlistErasing a CD from your ITS playlist Erasing a track from your ITS playlistDisplaying disc titles Using CD Text functions AccessoriesTV tuner Selecting discs from the disc title listStoring and recalling broadcast stations Storing the strongest broadcast stations sequentiallyAvailable accessories Bluetooth adapter Function menu switchingIntroduction of DVD operation OperationIntroduction of DSP adjustments Digital Signal ProcessorWhen the separately sold display is connected to this unit AT EQ and TA Auto TA will be cancelled Cannot switch to SLAOperating the DSP menu From front speakers onlyUsing the Dolby Pro Logic Using the position selectorAdjusting the Music mode Using the sound field control Using the down-mix functionUsing the dynamic range control Recommend turning Dolby Pro Logic II on. OnUsing the direct control Using the auto-equalizer Operating the DSP details menuAuto TA and EQ auto-time Alignment and auto-equalizingBefore operating the auto TA and EQ function Carrying out auto TA and EQAvailable accessories Setting the speaker setting Correcting the subwoofer’s phaseAdjusting the speaker output Pass filter. The cross-over frequency setting hasSelecting a cross-over frequency LevelsUsing the time alignment Adjusting the speaker output levels using a test toneAdjusting the time alignment Adjusting 3-band parametric equalizer Available accessories Additional Information Additional Information TroubleshootingCommon Problems during Video CD playback Problems during DVD playbackAdditional Information Error messages DSPUnderstanding auto TA and EQ error messages Error messages on the displayAdditional Information Understanding messages DVD discs DVD-R/DVD-RW discsAvchd recorded discs CD-R/CD-RW discsDual Discs Compressed audio files on the discExample of a hierarchy DivX video filesCompressed audio compatibility DivX compatibility Additional Information Language code chart for DVD Language code, input codeAdditional Information Terms Nels, 1 center channel, and 2 rear channels. aSurround system delivering multi-channel DTSMpeg VBR Additional Information Specifications LW tuner Meguro 1-CHOME, MEGURO-KU Tokyo 153-8654, Japan Kokzx 07B00000 CRB2390-A/N EW