LaCie DVD121 user manual Health and Safety Precautions, Class I Laser product

LaCie Dupli Disc DVD121 USB 2.0	Forward
User Manual	page 

This symbol on the prod- uct or on its packaging indicates that this prod- uct must not be disposed

of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designed collec- tion point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recy- cled in a manner that protects human

health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.

Class I Laser product

This equipment is certified to comply with DHHS Rule 21 CFR Chapter I, subchapter J in effect as of the date of manufacture.

This equipment is classified as a Class

I Laser product and no hazardous laser radiation is emitted outside the drive.

Laser Specification

Class I Laser product

Wave Length: 635-675 nm / 640-66 nm, 775-815 nm

Laser Power: No hazardous radiation is emitted.

Health and Safety Precautions

•Only qualified persons are autho- rized to carry out maintenance on this device.

•Read this User Manual carefully and follow the correct procedure when setting up the device.

•Do not open your duplicator or at- tempt to disassemble or modify it. Never insert any metallic object into the drive to avoid any risk of electrical shock, fire, short-circuit- ing or dangerous emissions. Your

duplicator contains no user-service- able parts. If it appears to be mal- functioning, have it inspected by a qualified LaCie Technical Support representative.

•Never expose your device to rain, or use it near water, or in damp or wet conditions. Never place objects containing liquids on the duplicator, as they may spill into its openings. Doing so increases the risk of elec- trical shock, short-circuiting, fire or personal injury.

•Make sure that the computer and duplicatord are electrically ground- ed. If the devices are not grounded, there is an increased risk of electri- cal shock. Power requirements 100- 240 V~, 1.5 A, 60-50 Hz, (Supply voltage fluctuations not exceeding ± 10% of the nominal, transient over- voltages according to over-voltage category II).