LaCie DVD121 user manual Select Source, Image, Edit Track

Page 22

LaCie Dupli Disc DVD121 USB 2.0

Using Your LaCie Dupli Disc DVD121

User Manual

page 22

 

 

4.8.“8. Select Source”

The Select Source function is used to choose the drive for the source data. The default source drive is the top drive.

Note that even if you change the source drive, only the top one can be used when connected in USB.

4.9.“9. Image”

This menu option is not available with this model.

4.10.“10. Edit Track”

The Edit Track function was designed to create a collection of audio tracks from various audio CDs onto one CD. This model only features theCD to CD and Close Session options.

Once the initialization is completed and the 1.xCopy menu is displayed, press the Down Arrow on the con- trol panel 9 times to scroll to the 10. Edit Track menu option. Place the source audio CD into the source drive and a blank CD-R or CD-RW into the target drive and press the ENT button select this function.

CAUTION: Do not open the DVD±RW tray while performing the Edit Track function. Doing so may cause an error and may close the session of the disc being recorded, rendering the disc unreadable.

Press the ENT button again and the screen will dis- play this information:

Select Track: 1/10 03:25

In this screen, the “1/10” refers to the first of 10 au- dio tracks, and the “03:25” refers to the length of the audio track.

You can use the Down Arrow button on the control panel to view additional tracks. Once the track that you would like to add is displayed, press the ENT button. A “+” will appear beside the selected track, as shown in the following screen:

7. Disc Info

Select Track: +1/10 03:25

After selecting this option, press the ENT button and the following screen will appear:

CAUTION: Pressing the ENT button after the track is selected will cancel the selected track.

10-01 . Edit Track CD to CD Edit

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Table of Contents Contacting Customer Support LaCie Dupli Disc DVD121 USB Forward Health and Safety Precautions Class I Laser productGeneral Use Precautions Media PrecautionsIntroduction To The LaCie Dupli Disc DVD121 Manual Updates Data SafetyFew Words About Copyright Laws Supported DVD Formats Your LaCie Dupli Disc DVD121Supported CD Formats Views Of The Drive Front ViewFront View Control Panel DVD Duplicator VerFront View DVD-ROM And DVD±RW Drives Rear View Connecting Via USB Setting Up Your LaCie Dupli Disc DVD121Powering On Your LaCie Dupli Disc DVD121 DVD Duplicator 1-1 ver Initialize Sdram Detect DrivesHow to activate USB connectivity on your duplicator USB ModeUSB LH mode Back to SA-Mode? Yes Turning Off The LaCie Dupli Disc DVD121Using Your LaCie Dupli Disc DVD121 Language Copying DVD Xxxx.x MB CopyCopy Copy OKTest Testing DVD Xxxx.x MB DxxxxTest Test & Copy Test & CopyTest & Copy OK Copying DVD Xxxx.x MB Dxx.xx Verify ComparePrescan Disc InfoImage Select SourceEdit Track Copying- 48X Edit 1/10 1/1 Select Track End 1Track0325End edit disc and burn?Yes Burn Complete10.3 .3 Play Audio Track 10.2 .2 CD to HDD10.4 .4 Close Session Setup Setup11.1 .1. Language Setup LanguageCD Burn Speed 11.2 .2. CD Burn SpeedSetup Auto Start Drive Setup Read SpeedSetup Startup Menu 11.7 .7. Auto Verify Setup Auto VerifySetup Auto Compare 11.8 .8. Auto CompareSetup Burn Mode Setup Eject DiscSetup Display Time Setup System Info Setup Button SoundSetup Device Info DVD-RW ND-3550ASetup Full Erase USB ModeSetup Quick Erase 11.17 .17. Quick EraseAdvanced Setup Advanced Setup13.2 .2. Overburn 13.3 .3. Read Error Skip13.1 .1. UnderRun Protect 13.4 .4. Format HDD13.10 .10. Local Default 13.7 .7. Update Firmware13.9 .9. H/W Diagnostic 13.8 .8. Compare Firmware13.13 .13. CD-TEXT 13.12 13.12. Isrc & MCN13.14 .14. USB Option Troubleshooting Emergency Ejection Of Discs Display Screen Messages Contacting Customer Support Before You Contact Technical SupportWarranty
Top Page Image Contents