Universal Remote Control omega MX-650 owner manual Save

T h e O m e g a

Note: If a component fails to turn off after you have entered all of the code numbers listed for your brand, your component might actually be manu- factured by another brand. You can scan through the other brands in the table using the UP and DOWN buttons to change the code number dis- played, then tapping either the Power ON, OFF or any other button to see if the component responds to any command. Alternatively, you can opt to use the Learning Method on Page 9 if you can’t find a code set in the built- in database.

Press Power On or Power Off to test if the device powers off.

Scan Down to the		Scan Up to the
		next Code
previous
		Number
Code Number
8	When the component turns off, save the code number you entered
	by pressing the SAVE button that appears on the screen.

Code Number You

Entered

SAVE

Button

9 Exit SETUP mode by pressing the MAIN button two times. When the display shows “MAIN”, you are back in normal operating mode.

MAIN

Button

8