Universal Remote Control omega MX-650 owner manual Display changes to either Good or Failed

	Universal Remote Control, Inc .
7	Press and hold the button you want on your old remote control until
	the display changes to either “GOOD” or “FAILED”.

8

9

If the “GOOD” label appears on top of the display, you were successful. Now, press the next button you wish to teach. Keep repeating steps 6 through 7 until you have learned all the buttons you want.

If the “FAILED” label appears on top of the display, try to teach the same button in Omega once again by repeating steps 6-7.

Continue to teach any commands from any of your remote controls by repeating steps 5-7 (to go back to step five, press MAIN once).

Once you completed teaching all the buttons, return to normal opera- tion by pressing the MAIN button twice. Test all your new commands. If any of them don’t work, try learning again using these notes:

Move to another room. Plasma TVs, sunlight, halogen or quartz lighting can interfere with the learning process.

Although the old remote control seems to work fine, change the batteries to fresh alkaline batteries.

Vary the distance between the remote controls gradually. Try 1/4”, 1”, 2”and so on, up to 4 feet.

Tap the button on the original remote control instead of pressing and holding it during the learning process.

11