Universal Remote Control omega MX-650 Volume Control Punch Through, Press the Punch button

T h e O m e g a

Volume Control Punch Through

In most home entertainment systems, the sound volume is only con- trolled by one device. In some systems, it is the TV speakers that make the sound, so you would use the TV device on the Omega to raise and lower the volume. In another system, it might be a surround sound receiver and speakers that control the sound, so you would use the Omega’s AUDIO device to adjust the volume. Constantly switching the Omega to TV or AUDIO to adjust the volume is inconvenient in daily life.

You can use Punch Through to set the Omega’s volume buttons to always control the sound in your system. That way when the Omega is set to VCR or DVD, the volume up, down and mute buttons will work perfectly without switching back to AUDIO or TV. Here’s how:

1	Enter Setup mode by pressing and holding both MAIN and ENT for
	three seconds. The top of the display show you are in SETUP mode

now.

Note: You have 30 seconds for each step, otherwise the Omega will time

	out automatically.
2 Press the PUNCH button.
3	Press the VOL button. The display confirms by displaying “VOL” at the
	top of the screen. This sets up the group of three buttons (Volume Up,
	Volume Down and Mute) in one action!	Select the
Select the VOL-		Transport group
UME group (Vol		(Play, Pause,
Up, Down & Mute)		Stop, Rew, FFwd)
Select the		Select the MENU
		group (Menu, Guide,
CHANNEL group		Info, Exit, Up, Down,
(Channel Up,		Left, Right, Sel)
Channel Down
and PREV CH)		Select the POWERgroup
		(ON and OFF)

The bottom of the display flashes ”PUNCH TO”.

12