Universal Remote Control omega MX-650 owner manual Macro Button Setup, Tons

Page 21

Universal Remote Control, Inc .

Macro Button Setup

Imagine turning on your TV, your DVD player and your surround sound receiver by pressing a single button on your Omega! What would nor- mally take three remotes and three button pushes, the Omega can accomplish with the press of one button. We call that a “Macro”. Any of the Display buttons, the Power On or the Power Off buttons (on any Device or Page) can be set to be Macro buttons!

To setup a macro button, follow these easy steps:

1

Enter the SETUP mode by pressing and holding both MAIN and

 

ENT for three seconds.

 

Note: You have 30 seconds for each step, otherwise the Omega will time

 

out automatically.

2

Press the MACRO button. The top of the display will show

 

“MACRO”. The bottom of the display will flash “SELECT”.

3

Navigate to the Device and Page where there is a button you would

 

like to set as a Macro button using the MAIN, DEVICE, and PAGE but-

 

tons.

 

Advanced Options:

 

If you wish to set one of the DEVICE buttons as a macro, on step 3, tap the

 

Page button until the top of the display changes to MAIN. Using the PAGE

 

button you can navigate to MAIN page 1 or page 2 before going on to Step 4.

 

Another option for DEVICE button macros is to only send the macro if the but-

 

ton is pressed and held. This is setup by entering a delay as the first step of the

 

macro. The amount of delay determines how long the user must press the but-

 

ton before the macro is sent. The advantage of this option is that a normal

 

press of the DEVICE button will simply switch devices without issuing the

 

macro.

4

Press the button you want to set as a Macro button. The top of the

 

screen will display the label of the button you selected. At the bot-

tom of the screen it displays “STEP0”, indicating that no macro steps have been entered yet.

19

Image 21
Contents Omega Thank You Table of Contents Getting Started Battery InstallationE O m e g a CongratulationsButton Layout Universal Remote Control, IncTV Device Button Light ButtonCodes by sending power off commands Basic SetupPre-Programmed Method Refer to the pre-programmed code tables on pages 37 52Press the P-PRO button to select the Pre-Programmed Method Press Button To displayOther ten Device names Use the number buttons to enter the code number Gram a device named TV with codes from the Cable code tablesSave Top of the screen will change to Learn Learning MethodDevice button Press Button First ten To display Other ten Device NamesPress any Button Display changes to either Good or Failed Press the Punch button Volume Control Punch ThroughChannel group Channel Up Left, Right, Sel Channel Down Prev CHMode and test your Punch Through settings You select the device that has the volume commands you wantBottom of the display will then flash Punch FROM. Now Surround sound receivers. The bottomTo setup your Favorite Channel buttons go to Setting Backlight OptionsAdvanced Operation FAV ButtonTransmitting Busy Signal Icon Universal Remote Control, Inc Adjusting ContrastAdvanced Setup Editing Button LabelsDisplay changes to the Edit menu. Press the Text button Want to EDIT, selecting between the FAV, MAIN, DEVICE, then Blinking Character Edit flashesDown Cursor Button deletes the currently Blinking character Edited and Saved will flash at the bottom of the display Edit the Main Menu Title or a Main Menu Device LabelDevice, press the Main button once, then repeat Steps Times to return to normal operationPress the Macro button. The top of the display will show Macro Button SetupMACRO. The bottom of the display will flash Select TonsMacro using the MAIN, Device and page buttons. Then press Favorite Channel Setup Returns to the Setup menu Hiding and Adding Pages Press the page buttonAppears at the top of the screen Want to edit Want to ADD? or HIDE? the page displayed. When you wouldPages FAV Pages byErasing Learned Buttons, Macros or Favs ErasingALL Button erases all settings Cloning One Omega to AnotherE O m e g a Erasing the Entire Omega Recalling Pre-Programmed Settings Utilizing Optional RF Base Stations Using MRF-250 or MRF-300 Addressable Base StationsUniversal Remote Control, Inc Changing the RF Settings E O m e g a RF Settings OverviewHere are the factory default RF settings of the Omega Only choice onIR/RF Signal Setting RF ButtonExit this Menu Displays Other Devices Devices of the Omega Emitt Setting IR Emitter Outputs From the RF Settings Menu, select EmittOr just one of the devices of the Omega Blast Setting the Front Panel Blaster On or Off Select ALL to change the blaster settings to From the RF Settings Menu, select BlastCable DVD VCR Audio SAT DVR Light AUX Webtv Tape Pre-Programmed Code TablesBrand Code Numbers TV TVs, Plasmas, Projectors and MonitorsKEC Cable Cable TV Descramblers/Tuners Comsat DVD-DVD Players DVD-TV/DVD Combos DVD-TV/DVD/VCR CombosDVD-DVD/VCR Combos DVD-DVD Recorders DVD Laser Disc PlayersVCR VCRs Instantreplay Audio Amps, Preamps and A/V Receivers VCR TV/VCR CombosArcam Klipsch SAT Satellite Receivers CD CD Players and Changers Amend Light Lighting Systems DVR Digital Video Recorders TiVo, ReplayAUX Custom Installation Products Tape Tape, Cassette and Reel to Reel recorders Webtv Internet Browsers for TVWarranty Frequently Asked QuestionsSpecifications If the batteries run out, will I lose my settings?M O M O Complete Control TM